Battery Washing Testing Machine

Model:	BE-Series
Brand:	DGBELL
Origin:	Made In China
Category:	Electronics & Electricity / Other Electrical & Electronic
Label:	battery wash test , battery safety test , testing equipment
Price:	US $15000 / set
Min. Order:	1 set

Inquire Now

Product Description

Battery Washing Tester BE-XD-6050

( Patent No.:201220243475 )

General Introduction

Lithium ion battery washing tester design and produced according to national standard GB portable lithium ion battery and battery pack for electronic products. Lithium ion battery easy get short circuit under 45 ℃ alkaline solution. Simulate safety problem which may occur when lithium ion battery inside polyester fabric in the running washing machine.

Application

1 Portable type electronic use lithium battery pack.

2 Lithium battery pack which able to put in pocket or portable type which used for electronic products.

3 Other electronic products use portable battery packs.

4 Non user replaceable battery/battery pack for electronic products.

Standard Compliance

GB31241-2014

Features

1 Built in SUS316#stainless steel water tank,used for alkaline solution proportion and testing liquid recollection.

2 High performance plastic water pump, able to get the alkaline solution from the stainless steel tank to the testing barrel in certain time, and the plastic material pump will not get rust or Oxidation, with long life service.

3 Testing inner barrel with SUS316# mirror treated stainless steel, good appearance and acid base resistant, middle with polyurethane insulation material, external with SUS304#stainless steel

4 PLC + Touch Screen Control, system finish the whole test automatically.

5 Driving system with servo motor, with features like large torque, Large rotational speed span, stable running etc.

6 Temperature control system, with SIMENS temperature module, PID auto calculating, high precision and stable running.

7 Easy water adding design:water tank top with large open design, when need adding water, the whole cover can be take off. Other time can cover it, safety and dust proof.

8 Humanized operation design:the whole operation finish within height1 meter to 1.5 meters, no need operators to stay down or get higher purposely ,all operation can be finished smoothly.

9 Movable Function Design:installed 4 universal wheel and casters on bottom side of the chamber, which makes the machine easy move to certain place as they want, and easy for fixing the machine.

Parameters

1 Testing Plate outer diameter	550MM
2 Diameter of inner testing barrel	650MM
3 Deepth of inner testing barrel	550MM
4 Plate rotation speed range	1—900rpm/min controllable
5 Servo motor power	5.0KW
6 Heating pipe power	6.0KW
7 Lifting & down plate Power	120W
8 Water Pump Power	100W
9 Control Method	PLC Touch Screen control
10 Servo Motor	With Japan Panasonic servo motor
11 Time Setting	0-999hours controllable
12 Temperature Fluctuation	±1℃
13 Temperature Uniformity	±2℃
14 Temp. Heating Rate	1℃/MIN(average )
16 Water Input Control Method	Water Pump automatic adding water
17 Heating Control System	Heating Pipe:independent water temperature control heating and temperature chamber control heating .
17 Heating Control System	Control Method:controller output signal through SSR relay realize high precision no touch switch control.

Structure

1 Inner Material	Inner barrel SUS 304#stainless steel(thickness 3MM),inner chamberSUS304#stainless steel(thickness 1.2MM)
2 External Material	Cold rolled powder painted (thickness 1.5mm)
3 Chamber Door	Single Left open door, with observation window, with explosion proof lock
4 Protection System	The whole testing system consist of inner barrel and external chamber, with strong explosion-proof performance. Even if the battery explode inside the chamber, there will be no damage for the outside chamber.
5Water Drainage System	With auto water drainage valve on bottom side of the liquid collection chamber, easy for testing water drain out laboratory.
4 Chamber Base	Installed 4 piece universal wheel, easy for moving and fixing.
5 Overall Dimension	W1550 X H1900 X D1200 MM
5 Power Source	AC 380V
6 Power	10.0KW
7 Machine Weight	About 500KG