Description:

Product Features:
With the frosting effect of ST-103C glass frosting powder, the frosted glass plate shows the best combination of low reflection and high transmittance with very silky smooth hand touch.
Just one simple process can achive : Hight transmission rate (above 75%), roughness (0.8-1.3um or, 1-1.6um )The roughness can be changed according to customer's requirments

Applicable Scope:
 ST-103C glass frosting powder is suitable for frosting touch screen glass which are widely used for computer, TV ,LCD touch screen, mobile phone touch screen and instrument screen.

Production process:
Clean glass plate ---> immersed in prepared frosting solusion (for25-40 seconds) ---> removal and cleaning ---> drying.

1.Preparation
Frosting powder,hydrochloric acid(31% concentration), PVC or plastic containers, rubber gloves and safety glasses.

2.Frosting Solution Preparation
1. Put the powder in a PVC container.
2.Add hydrochloric acid slowly into the container with agitation.
3.Cover the mixed solution 1-2 days for maturation, stir twice per day.

3.Frosting Operation
1.Stir the solution well with a wood plastic or plastic rod, filter the solution with 10-20 mesh nylon material.

Note: the collected solid residue can readily be reused after mixed with hydrochloric acid(HCL acid).

2.Pre-treat glass surface with diluted HCL acid(5-10%), wash the glass with water.

3.Dip the glass into the frosting solution or spray frosting solution on the glass surface. Glass frosting time varies with frosting solution’s concentration and temperature.

4.Drying
Dry the glass with hot air.

5.Frosting Solution Refills
The concentration of the frosting solution will decrease after frosting a few hours. The concentrated frosting solution(1:0.30 or 1:0.40) should be added into the frosting working systems to maintain normal production.

6.Treatment of Waste Water
During frosting operation, acid waste water needs to be neutralized with lime water.

7.Safety Notes
1.Wear safety glasses and rubber gloves during frosting preparation and operation.
2.Carry out frosting operation in a ventilated room.
3.In case of contacting skin or eyes, wash immediately with running water.Description:

Product Features:
With the frosting effect of ST-103C glass frosting powder, the frosted glass plate shows the best combination of low reflection and high transmittance with very silky smooth hand touch.
Just one simple process can achive : Hight transmission rate (above 75%), roughness (0.8-1.3um or, 1-1.6um )The roughness can be changed according to customer's requirments

Applicable Scope:
 ST-103C glass frosting powder is suitable for frosting touch screen glass which are widely used for computer, TV ,LCD touch screen, mobile phone touch screen and instrument screen.

Production process:
Clean glass plate ---> immersed in prepared frosting solusion (for25-40 seconds) ---> removal and cleaning ---> drying.

1.Preparation
Frosting powder,hydrochloric acid(31% concentration), PVC or plastic containers, rubber gloves and safety glasses.

2.Frosting Solution Preparation
1. Put the powder in a PVC container.
2.Add hydrochloric acid slowly into the container with agitation.
3.Cover the mixed solution 1-2 days for maturation, stir twice per day.

3.Frosting Operation
1.Stir the solution well with a wood plastic or plastic rod, filter the solution with 10-20 mesh nylon material.

Note: the collected solid residue can readily be reused after mixed with hydrochloric acid(HCL acid).

2.Pre-treat glass surface with diluted HCL acid(5-10%), wash the glass with water.

3.Dip the glass into the frosting solution or spray frosting solution on the glass surface. Glass frosting time varies with frosting solution’s concentration and temperature.

4.Drying
Dry the glass with hot air.

5.Frosting Solution Refills
The concentration of the frosting solution will decrease after frosting a few hours. The concentrated frosting solution(1:0.30 or 1:0.40) should be added into the frosting working systems to maintain normal production.

6.Treatment of Waste Water
During frosting operation, acid waste water needs to be neutralized with lime water.

7.Safety Notes
1.Wear safety glasses and rubber gloves during frosting preparation and operation.
2.Carry out frosting operation in a ventilated room.
3.In case of contacting skin or eyes, wash immediately with running water.