Class type hot melt adhesive

With the road covered with pieces of paper, melamine, PVC, ABS materials such as edge article on the hardwood, particleboard and MDF board edge banding or coating

Sex can - excellent wettability

- high initial adhesion

- long open time

- good liquidity, not drawing

- good thermal stability

Technical parameters

Apparent color: rice white round particles

Brinell viscosity: 180 ℃ / about 8 000 mpa. S

Softening point: 105 ℃

Construction conditions

Machine: is suitable for various models of automatic or semi-automatic edge banding machine

Temperature: 15 ℃ or higher

The temperature of the material: 15 ℃ or higher

The moisture content of materials: 10% or less

Glue roller temperature: 150-170 ℃ (edge), 160-180 ℃ (covered)

Glue quantity: 180-250 - g/cm2 (need to adjust according to actual condition)

Feed speed: 40 m/min (edge) or higher

Tip - often check on the rubber roller surface operation, remove impurities, to ensure uniform coating

- often calibration temperature control system of temperature

- work temperature should reduce 30-40 ℃

- environment and material temperature around 15 ℃, the gluing rollers should be set to the temperature of 150 ℃ (edge) and 180 ℃ (covered)

- not out of the hot melt adhesive should be sealed storage, in order to avoid contamination and moisture absorption

Package with 25 kg bags (800 kg/pallet)

Store in dry and shady and cool place, unopened product can be stored for at least a year.