Extruded ceramic filter 
 

Application: Grey iron, ductile iron, aluminum alloy and other non-ferrous alloys.

 

NINGXIN ECF filter can effectively remove inclusions and eliminate turbulence in the metal stream. Mullite-based ceramic material with a dense network of perfectly cells to withstand thermal shock and extreme pouring temperatures.The cellular design also provides an engineered balance between flow rate and strength.Our extruded ceramic filters have excellent properties of good thermal stability, high specific surface area and resistance to acid and alkali. They are applicable to wide and extensive foundry filtration applications and processes. 

Product features:

-Decrease the impurity of molten metal

-Deduce the turbulence of molten metal

-Improve the castings mechanical properties

-Decrease machining cost and improve the cutting characteristics

-Improve casting quality and yield

 

Technique data:

Main material: Cordierite, Mullite.

Refractoriness: >1500℃

CSI (cells per square inch):100/200/300

Porosity(%): 35-60

Bulk Density(g/cm3): 0.8-1.2

Compression strength:>20MPa

Size:From 40mm to 150mm square, rectangle and round shape

Hole type: square, round, triangle

Common sizes:
37x37mm 43.5x43.5mm 49x49mm 55x55mm 66x66mm 81x81mm D50mm D55mm D66mm D70mm D81mm

Thickness:9.5mm 12.5mm 15mm

 

Advantages:

-High dimensional accuracy

-High strength,no broken or damaged in use and transport

-Higher filtration effectiveness than fabric or wire mesh filter