Structure characteristics:
Stainless steel plate and frame filter press is suitable for the concentration of 50% low viscosity, less fluid slag content as airtight filtering to achieve purification, sterilization, clarification, filtration and activated carbon, in addition to particles, half fine filtration requirements, directly using microporous membrane, can pass the filter without microporous film can achieve aseptic filtration). This machine has big filter area, large flow rate, wide application range, so it is widely used in pharmaceutical, chemical, food and other industries, the application of filtering injection liquids in pharmaceutical factories, the effect is very good.
This machine in addition to the motor, the other parts are made of 1Cr18Ni9Ti (304) or 316L excellent corrosion resistant stainless steel materials, suitable for filtering solution of different pH value, the machine adopts sealed pressure filter, filter the filtrate loss, good quality, high efficiency. The filter part is composed of ten layers of filter plate, filter area, big circulation; and according to the different production process of filter solution (initial filtration, activated carbon, in addition to removal of particles, semi fine filtration, fine filtration membrane, and different requirements), according to the size of the user production flow may be appropriate to reduce or increase the filter plate the number of change, make it suitable for the production needs, so the utility model has the characteristics of a machine with a wide range of application; the filter plate adopts the plane thread mesh shape, advanced structure, no deformation, easy cleaning, can effectively increase the service life of membrane, thus reducing and saving the production cost, the machine is equipped with stainless steel the infusion pump, the motor is small, low power consumption. The base is arranged under the rubber wheel, convenient operation, flexible movement, can be used for mobile use.

TEL:13122299910

email:13122299910@163.com