RJ45 Series Ethernet Signal Surge Protective Device

Model:	DK-nDCt RJ45
Brand:	DIKAI
Origin:	Made In China
Category:	Electronics & Electricity / Other Electrical & Electronic
Label:	Ethernet surge , RJ45 surge protector , signal surge
Price:	US $11.6 / pc
Min. Order:	10 pc

Product Description

Product Introduction

DK-nDCt/RJ45 Network Signal SPD is designed according to IEC standards. It is suitable for lightning protection of computer, switches, POE power supply IP camera and other network equipments. With features of integration metal structural design, high discharge capacity and fast respond, it can effectively ensure the equipment to work properly.

Features

Good transmission performance, fast respond and long life.
Multistage protection, low residual pressure, low capacitance.
Can long-term work stably under hostile environment.
Can protect all kinds of system equipments from induced overvoltage, over current and other instantaneous surge voltage caused by lightning strike or industrial noise.

Technical Parameter

Item No.	DK-nDCt/RJ45 5-4S	DK-nDCt/RJ45 5-8S	DK-nDCt/RJ45 5-8S G
Rated Working Voltage	5V
Maximum Continuous Operating Voltage Uc	8V
Llimiting Voltage	≤30V
Nominal Discharge Current In(8/20µs)	5kA
Maximum Discharge Current Imax(8/20µs)	10kA
Respond Time tA	≤1ns
Type of Connector	RJ45
Material of Shell	Aluminum
Protection Level of Outer Shell	IP20
Working Temperature	–25~＋70℃
Relative Humidity	≦95%RH
Protected Core Wire	12,36	12,36,45,78	12,36,45,78
Transmission Rate	100Mbps	100Mbps	1000Mbps

Application Scope

1.Lightning protection for the network exchange board RJ45 connector in the computer room.
2.Lightning protection for the network card.
3.Lightning protection for the floor exchange board.
4.Lightning protection for other network equipment with RJ45 connector.