Stainless steel flexible heater/ Flexible tubular heater/ blower heater

Applications:

1.hot runner systems;

2.welding bars;

Specification:

The flexible tubular heater HEATLE-flex with a round section resp.

HEATLE- flexsquare section(contact surface 75%!)is delivered in various sizes and can easily be bent by hand-using the “HEATLE-flex too”- to fit into nearly any 2D or 3D contour and groove.

The outer sheath made of braided metal sleeve adapts to any shape and presses itself equally into any groove on the surface without gaps.

This guarantees optimal conduction even when under interspace.

Technical possibilities and options:

1.HEATLE-flex with around section Φ6.5mm,Φ8.5mm or Φ10.0mm

2. HEATLE-flex square with a square section 6.0x6.0mm or 8.0x8.0mm;high efficiency due to a contact surface of 75%

3.in numerous lengths and categories available

4.can be bent by hand to fit into nearly any 2D or 3D contour and groove

5.optimal conduction due to braided metal sleeve outer sheath

6.maximum length 2600mm

7.bend radius minimum 12.0mm,14.0mm resp.16.0mm in the middle

8.voltage 230V

Pls contact me by email ,My email address is anna@heatle.net