vulcanizing press machine

technical parameters

1. Total pressure: 1800ton
2. Plate size: 2000x2000x80mm (LxWxH)
3. plate pressure:4.5Mpa
4. cross beam is welded by Q235A steel board , by heating treatment to eliminate stress.
5. Daylight opening: 1500mm, three plates two opening, each layer daylight is 750mm..
6. Heating type: electric heating, 24pcs *2kw heating tube per hot plate, total 144kw for three hot plate.
7. insulation board: 1” thick insulation board (no asbestos)
8. hydraulic cylinder: 4sets, the cylinder is made of cast steel of ZG35#.
9. Diameter of piston : 600mm the piston is made of chilled cast iron, the hardness of surface is approx 60-70HS.
10. stroke of piston: 1500mm, up action.
11. construction of machine: frame type.

 We can design according to customer's requirement.