Concrete mixing station is divided into four parts: gravel feed, powder (cement, fly ash, bulking agents, etc.) to feed, water and feed additives, transmission and storage stirred their workflow mixer control systems after power-up, enter the human - machine interface dialogue system initialization process, including recipe number, grade concrete slump, producers, etc. according to the amount of weight for each hopper, metering hopper to detect the output material empty. or material full signal, prompting the operator to determine whether to activate the control program starts stirring sand, stone belt motor fed into the metering hopper; open fly ash, cement tank valve, start the electromechanical screw conveyor ash and cement into the metering hopper ; the control valve is opened and water storage pool water additives and admixtures metered into the metering hopper to meet the set requirements doo door open metering, mixing the ingredients into the mixer within already started to set time doors open mixer. concrete has splice into the mixer.
1. The respective cylinders, control valves and motors by concrete mixing processes required to run each cylinder, control valve and the motor must be accurate, stable and reliable.
2 control system with automatic or manual mode, and the relationship between each other is independent and restrict each other.
3 system with a good anti-jamming capability and improve the self-protection alarm.
4 through communication with the computer, it can display system status, fault alarm.

Zhengzhou XinFeng Machinery Manufacturing Co.,Ltd