Dilling and tapping machine center T6:

 High rigid machine frame to fit high accelerations
   High speed& low noise ballscrew and linear guideways on three was
   Direct drive spindle with standard speed 12000rpm
   Rapid feed 48m/min to reduce Non-machining time
Standard accessories
   MITSUBISH M70 Control System
   Direct Drive Spindle 15000RPM
   16 station armless tool changer
   Full enclosed splash guard
   Air Condition for electrical cabinet
   Rigid tapping
   Ethernet and CF Card interface
   Automatic lubrication system
   Coolant system
   LED working lamp
   End of program light
   Electronic Hand wheel(MPG)
   Tool box
   Leveling bolts and blocks
   Handy coolant gun
   Air gun
   Operation manuals
Optional accessories
   Syntec 21MA Control System available
   4th axis
   Spindle speed 15000rpm
   Spindle speed 20000rpm


Parameter:

model (unit)
Travel
X X-axis travel mm 600
Y Y-axis travel mm 450          
Z Z-axis travel mm 300

Gantry width (inside) mm

Distance from guide plane to spindle  center mm 130-450
Worktable

Worktable size (L×W) mm 600×500

Maximum load  kg 300
T T-slot
3-14-128mm
Spindle

Spindle Speed rpm 15000

Spindle motor power KW 5.5

Spindle collet chuck
ER25

Spindle taper hole
BT30

Unlock tool way
machinery
A.T.C

Tool storage capacity
(bamboo hat type) P C S 16
Motors
Federate Feed rate

X/Y/Z Ted X/Y/Z axis express displacement mm/min 24000

Cutting feed rate mm/min 12000
Accuracy

Pointing accuracy mm ≤0.01

Repeat ability accuracy mm ≤0.005
Machine information

Machine dimension (L×W×H) mm 1800×2100×2300

Machine weight kg 3000

Power requirement KVA 15