Saimo tilt switch controller is offered in two versions: SL28 for metal construction and SL29 for plastic construction. Both are protected to IP65, with large indicating lights located on the front panel.

A 0-10 second adjustable time delay circuit in the control unit prevents momentary tilting of the switch from causing a false or premature contact transfer.

A selectable jumper permits normal output condition for either vertical or tilted position of probe.

Two normally-open and two normally-closed output contacts are available for connection to external alarms and/or controls.

Technical Specifications

• Power supply:110 or 220 VAC ± 10%，47 － 62 Hz，10W
• Output:1 DPDT contact, rated at 5Amp/220VAC or 5 Amp/28VDC, non-inductive load
• Delay time:0-10 seconds adjustable
• Jumper:Allow to select vertical or inclined position as the normal status
• Enclosure:ABS outdoor casing