1.220V±10% 50HZ or 110V±10% 60HZ

2.60W EFR laser power tube 

3.Corellaser control system(mother board and panel)

4.LeadShine motor drive system

5.X axis transmission with white wheels, Y axis transmission with single linear bearing
6.red dot position, Red pointer can help you find the engrave position quickly.

7 up&down worktable

9 blade worktable and blade worktable

10.1×Air Pump(installed inside the machine) for Air Assist (for blowing off debris as the laser engrave or cut)  

11. 1×Exhaust(installed inside the machine) with Tube ducts ( for extracting gases from the work area)

12. 1×Water pump(not water chiller)

13. 1×USB Cable (connecting PC and laser)

14. 1×DVD (Including software, User manual, Guiding videos etc.)

15. 1×Power Cable

16. 1×Tool box