Product features:

Fire retardant: through national authoritative organization detect magnesium dragon plate fixation for a-class non-combustible material, with its walls and steel structure consisting of protect the fireproof limit is much higher than the national standard.

Waterproof moisture-proof: verified, magnesium dragon plate fixation in shuikou soak 1 months later, still remain the same, not deformation, the phenomenon such as swell, its dry wet deformation rate is 0.26%, bibulous rate is about 15%; Especially the flexural strength of dry for 18 mpa, namely the strength of the moisture condition to be higher.

Sound insulation wall of sound insulation: 95 mm can be up to four levels of 12 mm 123 mm wall of sound insulation standards of gypsum board structure, the equivalent of 150 mm ordinary solid brick wall sound insulation effect.

Heat preservation and heat insulation: magnesium solid dragon plate heat resistance is 1.14 M2kg/w, it has good heat insulation performance.

Light weight, high strength: 10 mm thick plate weight is 10.07 kg/m2, the use of light steel keel in wall after 31.5 kg/m2, about 1/10 of the solid clay brick wall, and the impact strength is 2-3 times of ordinary gypsum board wall, easy installation, can effectively shorten the construction period.

Green: the material for inorganic and natural materials such as plant fiber, radioactivity is far lower than the national standard, environmental protection conform to the requirements of the country, is the national policy encouraged new products.

Similar material characteristics comparison:

Plasterboard magnesium solid dragon glass magnesium board

1 level 15 mm thick, fire prevention board can meet the requirements of class B materials.

2, heavy water imbibition, easy expansion deformation.

3, plate as a rigid, can't make a shape bending.

4, secondary processing, the surface of the poor fit and can't stick to decorate layer.

5, heavy weight, manual effort, breakage rate is high.

6, low strength, weather resistance is poor, afraid of collision, fear tide, water, water is serious deformation.

Fiber cement (calcium silicate board)

1, 6 mm above can achieve a-class non-combustible material requirements.

2, expansion coefficient is approximately 8/10000 bibulous rate is slightly higher (bibulous rate 35%).

3, plate as a rigid, can't bend do all kinds of shapes.

4, can only adopt the mode of general construction, difficult to secondary construction and surface film.

5, the heavier weight, handling, breakage rate is high.

6, most products contain asbestos.

Magnesium cement dragon glass magnesium board

1, 3 mm thickness that meet the requirements of fire prevention.

2, resistant to moisture, changeless form, do not get damp.

3, can stick, cut, nails, glue, lacquer, sawing, planing, and can use pen knife cutting, convenient in construction.

4, plate body flexibility, flexible to do all kinds of shapes.

5, can match various panels, makeup or the original wood veneer is engaged in the secondary processing.

6, light weight, easy to carry, lower breakage, waterproof, moistureproof.