Fabric Hand Feel Tester

• By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material. 
• At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators

Product Description​

• The new type of concrete works softness measuring method is as follows: The main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions. 
• For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position. 
• Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component. 
• Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed. 
• Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.

​Technical Data

• Software: friendly interface, simple operation. Test data can be stored for a long, always call data storage software, data were compared with the current test.
• Sample size: φ112.8 mm
• Measurement: smoothness / roughness, softness, stiffness, feel value (HF)
• Measuring pressure: 100mN, 600mN
• Instrument size: 440x190x470 mm (H x W x D)
• Weight: 19 kg
• Power supply: 115-230 VAC, 50/60 Hz

​