A、

Project:

LED fluorescent lamp (tube light) assembly line machines

B、

Dimension：

Model type: 12000 L×600w（belt)×750H(mm)

C、

Structure：

Single way PVC belt conveyor, galvanized roller transfer, independent frequency control of motor speed.

D、

Description：

Stable performance, safety and reliability, simple operation.

E、

Specification：

1.

Motor :

Adopt 750W motor, WPS 60 type 1:6 0 of the speed reducer, the Chinese famous brand SONDAO 1 HP's frequency multiplier, frequency conversion sleepless speed regulation, linear speed 2-6m/min can be adjusted.

2.

Machine body

& frame :

Frame made by 40 x 40 square tube, stand by the same 40 x 40 square pipe production and become, below the belt by four points galvanized drum retainer and transfer; Leg match galvanized adjustable foot cup; Head plate with 1.2 mm cold plate bending rolling forming, body 2 meters one pieces.

3.

Conveying belt:

Using the Netherlands imported high quality green light delivery special PVC belt, thickness of 2 mm, width of 400 mm, belt total length is 24000 mm, ring seamless pyro-condensation connection.

4.

Independent

working station :

Independent table, specifications for 800long×600wide×750mm high(surface treated with antistatics),bilateral arrangement, the 25x 25 rectangular steel tube welding and become, 30L Angle retainer; Bedplate using 15mm quality compression plate, fastening fuselage both sides arrangement. Surface stick green antistatic soft rubber, green T strip edge; Fastening fuselage both sides arrangement.total of 16pcs of working table .

5.

Power

supply arrangement:

1.0 galvanized sheet bending and become, 2000x50x25 galvanized wire slot, is located under the fuselage belt, on both sides installation three, two square socket (every 1 m/workstation install one, bilateral installation).

6.

Lamp lighting:

choose 40 x 20 square tube welding production, connection on the machine body every 2m a frame with cold plate bending a 2000 x 50 25 connection power, makes workers operating space more open, lighting choose LED T8 lamp, bilateral along the line arrangement.

7.

Electric devices

Control:

Full range of electrical control done by a distribution box, with power left and right road control.

8.

Operation card:

Located in the middle frame processing instruction card stand all the way, uses the H - type aluminum rails manufacture, card board with A4 transparent hard plastic.

9.

The upper table：

12000×400×13mm,by 30L angle steel bearing ,made of 13mm high quality plywood ,surface with anti-fire materials, space between the belt is 400mm.