Model No.: LB-x6         Power: 220V       Watt: 10W          
Weight: 2.7kg            Size: 482 x 132 x 66 mm

1. Brief introduction
The effector is developed professionally for KTV, it is of speaker controlling function which can be adjusted. There are 3 grades of feedback inhibition pattern for the microphone and 6 mode parameters are preset for 16 parameters storage. The effector can be connected to the PC by USB to change and regulate the parameters.
 
2. Features:
(1). The effector is professional for KTV as a speaker controller
(2). 24 Bit data bus and 32 bit DSP
(3). Music 7 band parametric EQ  
(4). Mic 15 band parametric EQ  
(5). Primary 5 band parametric EQ
(6). Mid-output, rear out and X-bass 3 band parametric EQ each
(7). Mic 3 grade feedback control, OFF/ON available
(8). 16 modes saved, of which the first 6 modes can be taken by remote controller
(9). Mic, primary, mid, rear, X-bass out can be limited and delayed.  
(10). Administrator and users mode are set in the effector,  but the parameter change in users mode will not be saved.
(11). Full-function panel is attached by which all the parameters can be regulated.
(12). The effector can be connected with PC via USB B-4Pin at the effector and USBA at the PC which is convenient for operation, exchange and maintenance.
(13). Common mode restraint of the mainboard is up to 2000V
(14). No noise off or no zero drift problem at the output end
 
3. ParametersModel No. LB-x6                      Power: 220V                     Watt: 10W     
Weight: 2.7Kg                                            Size: 482 x 132 x 66 mm
 
Music volume:0 - max music volume                     Max music volume:0 - 84
Mic volume:0 - max mic volume                           Max mic volume:0 - 84
Effect volume:0 - max effect volume                      Max effect volume:0 - 84
Echo effect/Echo direct sound/Reverb/Reverb direct sound:0 - 100
Main out music/Main out direct sound/Main out Echo effect/Main out reverb effect/Mid out music/Mid out direct sound/Mid out Echo effect/Mid out reverb effect/Rear out music/Rear out direct sound:0 - 200
X-bass output music /Volume of direct sound:0 - 400
Music input:1 - 2                                         Music input gain:0 - 6
Music high pass/Mic high pass/Mid out high pass/X-bass output high pass/X-bass output low pass/Rear output high pass:OFF - 303           Echo high pass:OFF - 1000.0 
Echo low pass/reverb low pass frequency:5990.0 - 20600.0
Reverb high pass frequency:19.7 - 1000.0  
Music/Mid output high pass:12 - 24                    EQ Pass:enabled/Disabled
EQ type:P/LS/HS                              EQ frequency(Hz):19.7 - 20600
EQ gain:-24 - +12                                         EQ Q value:0.4 - 128
Mic FBE mode:OFF - 3                                   Echo pre delay:0 - 250
Echo delay:0 - 500                          Echo right channel pre delay:-50 - 50
Reverb pre delay:0 - 200                                  Reverb delay:0 - 5000
Main out left/right channel, mid out, X-bass output, rear output left/right channel:0 - 50
Echo repeat ratio:0 - 90                                     Microphone:-34 - 0
Primary output/Mid output/X-bass/rear output:-20 - 14
Mic/Main output/Mid output/X-bass output/Rear output:0.5 - 90
Mic/Main output/Mid output/X-bass output/Rear output:Atk*2 - Atk*32
Mic/Main output/Mid output/X-bass output/Rear output:1.0 - 100
X-bass output low pass Q value:0.4 - 1.5
X-bass high and low pass slope:Bessel24dB - USER 24dB