Angular displacement sensor is an electronic device that can locate the position of the object according to the change of the angle, which is suitable for the measurement, control and application of the instrument. Corrosion resistance, impact resistance, flexible use, easy maintenance, etc are its advantages, and it is widely used in many industries.When the sensor is used, it is based on the principle of voltage divider to output voltage or current output (4~20ma), and the linear relationship between the rotation angle of the shaft and the linear displacement. Its characteristics are high precision, high life, high Gaoping slip and high resolution and it can be used as position feedback, position detection, level regulation, etc..It commonly used in industrial automation, precision instruments, electric actuator, textile, injection molding, CNC machine tools, medical equipment, automobile, train, aircraft, ships, missiles, etc. and in the field of automatic control system, servo system and information feedback system.It is mainly composed of a resistance element, a shaft, an electric brush, a shell, a cover, and the like.The displacement transmitter or digital display, which is suitable for all kinds of analog output applications, but also with the application of digital signal output.If it is used in conjunction with the A/D converter, the digital type absolute encoder with high performance price ratio can be used for accurate positioning and position detection.

General characteristics:

1. Anodic alumina shell and high temperature resistant plastic cover;

2.Shafts and bearings are made of stainless steel;

3.The resistance material for conductive plastic;

4.Brush assembly for precious metal multi contact electric brush;

5.Electrical connection is gold plated brass terminal.

Characteristic of angular displacement sensor:

1.Service life of up to 100 x 106 run;

2.Linear excellent, ±0.05%;

3.High resolution, better than 0.007 degrees;

4.Maximum allowable speed, 10000 rpm;

5.Limiting continuous rotation.

Suitable occasion:

The angle displacement measurement is suitable for the measurement of the maximum value of the angle of 355 degrees.

Installation instructions:

1.The position of the lug boss is arranged on the sensor, and the screw and the nut are fixed on the metal plate. When a sensor is installed on the shaft and housing, prohibited vehicles, drilling and other processing, avoid the shaft or housing by external impact force and pressure, axial and radial not permitted by the impact and pressure (static pressure should be less than 300N).No loosening of the screws on the sensor and the rotation of the fixed ring position.

2.The sensor shaft and other parts connection should pay attention to the axis line to keep it in a straight line (including working state), such as axis deviation, recommend the use of universal joint or corrugated pipe connector, so as to avoid the sensor shaft bending deformation, damage to other devices, thus affecting the using.

3.Should prevent water droplets, vapors, solvents and corrosive gases on the sensor's invasion, prevent metal chips or other powder into the sensor.

4.The external connection of the sensor should be welded at the outlet end of the outlet, as far as possible not to solder at the top of the outlet. Welding should be used when the electric iron is not greater than 45W, the welding time should be less than 5 seconds. In the welding and not cooling through the wire should not be pulled, so as to avoid the whole wire brush or pull out, or even off. To minimize the use of welding flux, soldering paste, time should be short, avoid flux vapor through terminals inside the transducer, causing the steam cooling after deposition in the resistance surface, caused by the equivalent noise resistance becomes poor, even open.

Shenzhen miran Technology Co., Ltd is a high-tech enterprise approved by Shenzhen municipal government. Rich experience in sensor industry field for more than 15 years, the great brand products have been widely used in the world all kinds of automation control field, the direction of development is: to technological innovation as the core, to customer demand-oriented, will have been committed to the field of measurement and control in displacement, position and angle provides a station solutions to products and service for customers.

The main products are miran technology / resistive potentiometer displacement sensor principle (electronic scale), pull rope type displacement sensor (rope type electronic ruler), principle of magnetostrictive displacement sensor (contactless magnetic induction electronic ruler), principle of magnetostrictive liquid level sensor (liquid level measurement and control system), differential displacement sensor, LVDT eddy current displacement sensor, angle sensor (angle ruler), transmission module, digital display instrument and intermittent automatic lubricating oil pump etc.. All products have achieved CE, 3C certification, and access to ISO9001:2008 international quality system certification, in strict accordance with the international quality certification standards organization design and production, to ensure product quality.