cold water storage tank

1) Material:Stainless steel, austenitic stainless steel 304, 316L etc, with insulating material or not

2) Tank shell thickness:2mm at least (according to the design or your required)

3) Design work pressure (MPa):-0.1~~9.9MPa (According to the China national standard, breakthroughs in the foregoing measurements are allowed in special cases)

4) Design work temperature:-70~~+350C

5) General accessories(If required):Manhole, CIP, respirator, sight glass, mixing(Top side or bottom)

6) Service:We can provide you with a complete set of service from quota, design, manufacture and installation, according to your requirements we can design by your plan, or manufacture by your drawing, guarantees inner quality and safety, good looking appearance and function by introducing international advanced large-sized equipment of pulse plasma arc welder and auto polishing machinery and cooperating with international famous finished equipment making company.More detailed information will available on your requirement.

Regardless of your particular application,We have the capability to produce ( cold water storage tank )

with a variety of metals (from carbon and stainless steel storage tanks). Whether you need large volume ( cold water storage tank )

, or small, with high-pressure tanks or low-pressure, we have the capacity and expertise to make it happen.

Supporting Custom Fabrication

Design services team integrates your specific ( cold water storage tank )

with detailed CAD drawings and our broad engineering expertise to produce some of the finest quality tanks in the industry. We build what you want and work with you on the details.

Quality Control Inspection and Testing

Our ( cold water storage tank ) are manufactured in accordance with the JB4735-1998 or GB150 Pressure vessel. Our extensive quality control system ensures that all tanks have been properly designed, constructed, inspected and pressure tested. We apply our stringent quality standards to storage tanks of virtually any design, size or configuration.

Application :

1.Food, Beverage, Wine, Beer, Juices, beverage, Pharmaceutical, Biotechnology, Laboratory as well as Chemical Industry ,Painting Industrial and water treatment

Cip-System:It is the tank-cleaning device for the rapid automation process. Pre-set system contrls the cleaning rprocess from the beginning to the end.It is simple, fast, and cleans thoroughly. The sanitary valves concerns as well as structure.

2. Equipment:Acid tank, caustia alkaine tank, and warm warer tank one for each, the recycing of detergents and adjustment of temoerarute, and liquid level are preset.

3. Procedure:

(1) Water flow 1 second to 99 minutes 59 seconds, changed to constant temp.99°

(2) Acid clean 1 sec. to 99 min. 59sec, changed to constant temp. 99°

(3) Waterflow 1 second to 99 min. 59sec,changed to constant temp. 99°

(4) Alkaline clean 1 sec . to 99 nin. 59 sec, changed to constant temp. 99°

(5) Water flow 1 second to 99 nin. 59 sec. shanged to constant temo. 99°

(6) Sterilization 1 second to 99 nin.59sec changed to constant temp. 99°

4. Processing order:

(1) The liquid level in tank must be adjusted before operation.

(2) Cycling detergent must be released according to the switching of the flow valve. Wrong operation on LNTER LOCKin the control system stops the cycling of detergent, operation will automatically stop.

(3) Water temperature is adjusted by thermal regulator. Sst INTER LOCK operation in the control system to prevent conplete sterilization during cleaning.

(4) Air purge system starts working, most detergent can be recycled.

(5) Buzzer sounds to indicate complerion of the operation.



Advantages:

1.It can make the production plan reasonable and improve the produce ability.

2.To compare with the hand-wash,it doesn't influence the cleaning result because of the worker's difference,on the contrary,it can improve the products' quality.

3.It can prevent the dangers of cleaning work,so that we can save the work force.

4.It can save the cleanser,the steam,the water and the cost of production.

5.It can extend the service life of the machine parts.

6.It includes three types,one is the handwork system,one is the semi-automation system,and the other is the whole-automation system,so it is easy for customer's selection