The GSM Controller RTU5011 is a universal GSM dialer and controller as well as a GSM Remote Control and Alarm Unit. RTU5011 provides 8 relay drivable outputs(12V-24V), 8 Digital inputs,4 Analog Inputs and RS232 Serial Port. It allows you to monitor and control an alarm or remote stations or equipments or machines by SMS(Short Message Service) Or transport data between user and PLC. Another, it can transmit data from apparatus (thermometer, humidity meter, electric meter, flow meter) to user or monitoring center by SMS(GSM DTU).

(The different from the GSM Controller RTU5010 is the GSM Controller RTU5011 with 8 I/O Ports, 4AD inputs, Microphone and Speaker . The GSM Controller RTU5010 with 4 I/O ports, without AD inputs, Microphone and Speaker. The other functions are the same.)

Mainly Features of the GSM Controller RTU5010:

◆ 4 relay drivable outputs(12V-24V), Any relay can be switched on by sending a SMS or call to the unit;

◆4 Alarm logic inputs for SMS reporting and dialing (the inputs react to a connection or disconnection to or from a common GND terminal);

◆ Bidirectional data transmission, this is very useful to connect PLC equipments;

◆ Can read logic input status by SMS;

◆ Up to10 different mobile phones numbers can be pre-set in the system;

◆ Password protected, prevents unauthorised use;

◆ Each logic input can be assigned to one or more output relays;

◆ Can be set up and programmed from any GSM phone and PC;

◆ An arm or disarm button is optional for the user;

◆ Timer function, can be programmed when send back the report or when switch on the output relays.

◆ Time stamped alarm messages.

 Based on GSM Network.