Our main products are Remote training control collars, Dog In-ground Pet Fencing System, Auto bark-stop collars, Ultrasonic drive dogs and the other pet products.

Part A, launch the host:

1, with the adapter connected to AC85-265V, insert the plug of adapter input port host DC input port (figure 1), press the switch indicator .

2, press the power switch button (figure 2), figure 3 digital display initial value set 50;

Figure 2 shows a button, press the "-" value, press the "+" is increasing.

3, Distance setting range, A value 01-05, the corresponding receiver receiving distance is 10-30 meters range, B value 06-25 corresponds to the receiver receiving distance 40-60m range, C value 26-50. Corresponding receiving The range is 70-100m.

4, the host has two fixed on the back of the hang hole (figure 3), and ease of installation.

4, figure 4 is the receiver of the power switch, press the switch on hear the buzzer , drops of sound, the corresponding indicator ligh ,blue lights flashing twice, receiver search and launch host matching, matching success intermittent flash a red light, working properly.

5.after the success of the match, the receiver will wear automatic training function, according to the using range. Adjust the transmitter's corresponding numerical distance. The dog after exceeds the scope of activities, business warning came first, then electrostatic stimulation of the punishment to remind the dog back to the safety area.

6.the receiver is waterproof, rechargeable, economy is durable.

7. In power Li-battry:3.7v 200mA

Testing

8. Press the power switch, as shown, will be a continuous alarm, tester lights flashing.