Polyurethane footwear outsole pouring machine 
 
Product Application
This equipment is used to produce polyurethane insoles, outsoles, high heels, leather shoes, casual shoes, safety shoes, travel shoes,slippers, sandals, flip flops and other all kinds of polyurethane shoes.
 
Product Component
This equipment includes one three components low pressure pu foam machine and one automatic banana-type production line. According to the client's production capacity, the production line has 24, 36, 60, 80,100, 120 or other mold stations for choose.
 

SPECIFICATION
 

 
 
 
 
 
Three-components inject machine

Item No. 

LZ905 

type of applicable foam

Sole,insole, walking shoe, etc.

Flux of inject

30g-100g/S (Attention:the flux could be configured)

The mix proportion

100-65;100-110

Process of injecting

Manual or automatic inject  by PLC programmed for choose

Dimension

Wide:2.1M; High:2.35M; Long:3.5M

Weight of the machine

1.5ton

 
 
Pneumatic molds Production line

Pneumatic mold station

24,36,60,80,100,120 mold station for choose

Mold station

open and close automatically

Material for work station

3mm, iron plate

Mold heating way

water recycling system

Water heating box

150L,304 stainless steel

 
 
Why choose it: 
1. Most of the components are imported , like the metering pump and electrical components, greatly enhancing equipment running reliability and service life; 
2.  The moulds can be opened and closed automatically  by the pneumatic system which can  save the labor cost and around 2~4 people are required for the production only. 
3. The molds are heated by circulating  water heating system ,  i t can  save 3/2 electricity  compared with the traditional manual machine, it also makes the temperature of the molds stabler. 
4. the injection can be or can not be robotic control, which is customized for the client. 
 
 
What it can produce:

 
Contact: Sarah 
Mobile/wechat/whatsapp: 0086-13560139619
Email: sweetchan@126.com