Application

The cables are designed for general uses in protective devises in railways signalling networks, and are suitable for installation in ducts.

Standards

● Dlk 1.013.107y
● Dlk 1.013.108y (for 1.4/1.8mm conductor H95 type)
● Dlk 1.013.110y

Construction

Conductors
Solid annealed copper, 0.9, 1.4 or 1.8 mm nominal diameter.

Insulation
Solid polyethylene.

Stranding
Single conductors are helically stranded in concentric layers. Cables from 14 conductors on, have two
extra conductors with perforated insulation (surveillance conductors).

Core Wrapping
Plastic tape(s) with overlapping.

Outer Sheath
Low density polyethylene.

Type Codes

A– outdoor cable
2Y- solid PE conductor insulation
2Yv- PE sheath with increased wall thickness
S- signal cable
LG- layer stranding
H(n)- operating capacity

Mechanical and Thermal Properties

Minimum Bending Radius: 7.5×OD
Temperature Range: -40℃ to +60℃ (during operation); -10℃ to +60℃ (during installation)