Flattened expanded metal is manufactured by passing the metal through a cold roll reducing mill 
parallel to the LWD. It is Standard Expanded Metal that has been rolled through a flattening 
machine in the expanding process. By flattening the sheet, the bonds and strands are turned down to 
produce a smooth and flat surface – essentially elongating the LWD of the diamond.

Materials: stainless steel, carbon steel, brass, aluminum, nickel, Al-Mg alloy.

Flattened expanded metal Features:

• Lightweight.
• Economical.
• Versatile.
• Low Maintenance.
• Can be bent or formed in any direction.
• U-edging for finished edges.

Flattened expanded metal sheets:
1. Camber- The greatest deviation of a side of edge from a straight line after flattening shall not 
exceed 3/32 inch per foot (0.8mm per 100mm) of dimension.
2. Thickness- shall not be less than 70% of the nominal thickness specified for the sheet from the 
item produced.
3. Squareness- Ends shall not be more than 1/8 inch per foot (1mm per 100mm) out of square or 
1/2 inch (12.7mm) overall. 
4. Flatness (Levelness) – Sheets shall be free from waves or buckles that are in excess of 1-1/2 inch 
(38.1mm) from a plane surface.

Sale Manager : Ms Suzen

Mob:+86-15131889404(whatsapp)

Skype:suzen318

Email: sale(AT)huijinwiremesh.com

Website:www.huijinwiremesh.com

Add: Anping County ,Hebei Province ,China 

Anping Huijin Wire Mesh Co.,Ltd