Short Description:

Direct burial optic fiber cable, Metallic (Non-metallic) strength member, loose tube stranded type (PBT), gel filling, laminated aluminum-polyethylene inner sheath, longitudinally wrapped corrugated steel tape armor and outer polyethylene sheath outdoor cable for communication purpose

Description:

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. This is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

Basic Info:

Type: Single-mode Fiber

Operating Temperature Range (°C): -40 to +70

Number of Cores: 2 – 288

Cable Diameter (mm): 12.4 to 20.2

Permissible Tensile Force (N): Short-Term: 3000, Long Term: 1000

Specification: CE, ISO9001

Applications:

Used in communication

Useable in underground (Direct Buried)

For more information please visit www.rayemit.com