powder coating aluminum expanded metal

Model:	19
Brand:	DBL
Origin:	Made In China
Category:	Construction & Decoration / Other Construction Materials
Label:	aluminum expanded , expanded metal , powder coating metal
Price:	US $10 / pc
Min. Order:	5 pc

Inquire Now

Product Description

Expended metal mesh is produced from one single sheet, so nothing can come loose. This is why it is ideal for forming and model making.
The production process comes from one sheet and is slit and stretched at the same time. This limits waste to a bare minimum, unlike perforated mesh for example.
Expanded metal mesh has a very high strength to weight ration, much higher than standard sheet metal. This means that it is ideal for walkways etc.

LWD

(Long Way of the Diamond), measured from the center of the joint to the center of the adjacent joint. This dimension is built into the tool, and is always parallel to the width of the coil and corresponds with the diamond dimension.

SWD

(Short Way of the Diamond) is the length of the short axis way of the diamond, measured from the center of the joint to the center of the joint. For each fixed LWD dimension, there is a range of SWD dimensions available as shown above.

Camber

type of expanded	camber tolerance
Standard & Grating or Catwalk	The greatest deviation of a side edge from a straight line shall not exceed 1/16 inch per foot of dimension (SWD or SWD).
Flattened	After Flattening, the greatest deviation of a side edge from a straight line shall not exceed 2/32 inch per foot of dimension.

Squareness

Type of Expanded	Squareness tolerance
Standard	Edges shall be such that any intersection side shall not be out of square in excess of 1/32 inch per foot either direction, to a maximum of 1/16 inch overall.
Flattened	Edges shall be such that any intersection side shall not be out of square in excess of 1/32 inch per foot either direction, to a maximum of 1/16 inch overall.