ATQJ series submersible pump
Address：Jinnan Economic and Technical Area,Tianjin.
Aote Tianjin Pump Co.,LTD
TELEphone number：022-60956003
Mobile phone：15620568657
WEchat：15620568657
QQ：151622340
Contacts：Manager Liu

ATQJ series submersible pump：
Application
It is suitable for farm irrigation, sprinkling, rainwater recycling system, mining drainage, emergency rescue and disaster relief, urbanwater supply, enterprise and government institutions water lifting. This products is low noise, high efficiency and energy saving.
Advantage 
1.    Scientific design, high head for single stage impeller, steadily operating and low noise.
2.    Superior iron as its raw material, scientific casting method ensures the compactness of the molecular structure of castings.
3.    CNC lathe precision machining ensures parallelism and perpendicularity of all the parts and also the pump’s concentricity, extending its service life.
4.    Rigorous testing, well installation and full load performance test.
5.    The service life of the improved rubber bearing liner (technological secret) is 2 times longer than that of common bearing liner.
6.    The material of the pump shaft: general chromium-plating, 2Cr13, stainless steel 431, stainless steel 631, monel, etc.
7.    Material of impeller: stainless steel 304,316,316L, tin bronze and aluminum bronze, etc.
8.    Some of our products produced by introducing the Germany Ritz technology, increasing the pump’s outer diameter, meanwhile meeting the customer’s needs of high head submersible pump.
Medium Range
1.    Clean water, chilled/cold water, rainwater, underground gushing water of mining, drinking water, mineral water, etc.
2.    Water temperature range: +5℃~+25℃
3.    Solid content(mass ratio): ≤0.01%
4.    PH value: 6.5~8.5
5.    H2S content: ≤1,5mg/L
6.    Cl content: ≤400mg/L
7.    The full set must be submerged into water absolutely.
Motor parameter and service condition
1.    The motor must be submerged into water in vertical from with a depth no more than 70m and the lower distance to the bottom of the well is no less than 5m.
2.    The motor will operate continuously and is not suitable for frequently start. The soft-start mode is preferred and then reduced-voltage starting. The staring time should be controlled between 60-180s according to the head and pipe length. The soft-stop mode is also preferred.
3.    If it is used in special circumstances, such as mining rescue, the submerged depth could be extended appropriately, then it must be put on records, or else it will not be within the warranty period.
Power Supply
380V/50HZ 660V/50HZ
If you need special voltage or frequency, please inform us in advance.
Installation From
The normal installation form is vertical. If the actual condition doesn’t allow the vertical form, you can contact the manufacturer to choose the motor of horizontal installation form, however, its service life will be less 40% than that of vertical installation form.
 
ATQJ series submersible pump AT150QJ Introduction：
AT150QJ model description
For example: AT150QJ32—128/15
AT: Abbreviation of Chinese Aote (Enterprise Standard)
150: Minimum well innerdiameter
QJ:  Q, submersible (the first letter of Chinese Qianshui )
J, Seawater (the first letter of Chinese Haishui)
32:Flow capacity (m3/h)
128/15: 128, head (m)   /15 :15-stage impellers series connection

Material
Delivery casing: non-corrosive medium: cast iron HT200; mildly corrosive medium: anticorrosive coating, chemical treatment; moderately corrosive medium: stainless steel 304; strongly corrosive medium: stainless steel 316, stainless steel 316L, tin bronze 3861.
Shaft: choose the material according to the medium. Non-corrosive medium:45# Cold-drawn steel with chrome plating shaft; moderately corrosive medium: 2Cr13, 3Cr13; strongly corrosive medium: duplex stainless steel.
Bushing: it is technological secret.
Packing
If the customer has no special requirement, we generally pack the products with wooden cases. The pump and motor are packed in one case if the total length of the full set is less than 3.2m. Contrarily, the pump and motor are respectively packed.
Technical parameter
Maximum outerdiameter: 143mm. Outlet diameter: 65mm/68mm
Dimension of the outlet flange(4 holes): center distance, 110mm; aperture, 11m
Attention:
For the convenience and quality, all the related products are manufactured by us. The following products:
1.  All kinds of lifting pipes including ratio-frequency welded pipes (dia.25mm-500mm); connect type: flanged connection, screwed connection and clamp connection. They are made accurately by machine tools.
2.  Pipe clamp: the length is 50mm-500mm (span as required).
c. Wellhead devices including recharge wellhead (applied to earth source heat pump), regular base plate with advanced manufacturing technique.
3.  Demander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.
4.  Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set ,etc.
5. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation

ATQJ series submersible pump AT200QJ Introduction：
AT200QJ model description
For example: AT200QJ80—136/8
AT: Abbreviation of Chinese Aote (Enterprise Standard)
200: Minimum well inner diameter
QJ:  Q, submersible (the first letter of Chinese Qianshui )
J, Seawater (the first letter of Chinese Haishui)
80:Flow capacity (m3/h)
136/8: 136, head (m)   /8  8-stage impellers series connection

Material
Delivery casing: non-corrosive medium: cast iron HT200; mildly corrosive medium: anticorrosive coating, chemical treatment; moderately corrosive medium: stainless steel 304; strongly corrosive medium: stainless steel 316, stainless steel 316L, tin bronze 3861.
Shaft: choose the material according to the medium. Non-corrosive medium:45# Cold-drawn steel with chrome plating shaft; moderately corrosive medium: 2Cr13, 3Cr13; strongly corrosive medium: duplex stainless steel.
Bushing: it is technological secret.
Packing
If the customer has no special requirement, we generally pack the products with wooden cases. The pump and motor are packed in one case if the total length of the full set is less than 3.2m. Contrarily, the pump and motor are respectively packed.
Technical parameter
Maximum outer diameter: 143mm. Outlet diameter: 65mm/68mm
Dimension of the outlet flange(4 holes): center distance, 110mm; aperture, 11m
Attention:
For the convenience and quality, all the related products are manufactured by us. The following products:
1.  All kinds of lifting pipes including ratio-frequency welded pipes (dia.25mm-500mm); connect type: flanged connection, screwed connection and clamp connection. They are made accurately by machine tools.
2.  Pipe clamp: the length is 50mm-500mm (span as required).
c. Wellhead devices including recharge wellhead (applied to earth source heat pump), regular base plate with advanced manufacturing technique.
3.  Demander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.
4.  Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set ,etc.
5. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation

ATQJ series submersible pump AT250QJ Introduction：
AT200QJ model description
For example: AT250QJ125—162/6
AT: Abbreviation of Chinese Aote (Enterprise Standard)
250: Minimum well inner diameter
QJ:  Q, submersible (the first letter of Chinese Qianshui )
J, Seawater (the first letter of Chinese Haishui)
125:Flow capacity (m3/h)
162/6: 162, head (m)   /6  6-stage impellers series connection

Material
Delivery casing: non-corrosive medium: cast iron HT200; mildly corrosive medium: anticorrosive coating, chemical treatment; moderately corrosive medium: stainless steel 304; strongly corrosive medium: stainless steel 316, stainless steel 316L, tin bronze 3861.
Shaft: choose the material according to the medium. Non-corrosive medium:45# Cold-drawn steel with chrome plating shaft; moderately corrosive medium: 2Cr13, 3Cr13; strongly corrosive medium: duplex stainless steel.
Bushing: it is technological secret.
Packing
If the customer has no special requirement, we generally pack the products with wooden cases. The pump and motor are packed in one case if the total length of the full set is less than 3.2m. Contrarily, the pump and motor are respectively packed.
Technical parameter
Maximum outer diameter: 143mm. Outlet diameter: 65mm/68mm
Dimension of the outlet flange(4 holes): center distance, 110mm; aperture, 11m
Attention:
For the convenience and quality, all the related products are manufactured by us. The following products:
1.  All kinds of lifting pipes including ratio-frequency welded pipes (dia.25mm-500mm); connect type: flanged connection, screwed connection and clamp connection. They are made accurately by machine tools.
2.  Pipe clamp: the length is 50mm-500mm (span as required).
c. Wellhead devices including recharge wellhead (applied to earth source heat pump), regular base plate with advanced manufacturing technique.
3.  Demander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.
4.  Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set ,etc.
5. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation
Product Selection Table

ATQJ series submersible pump AT300QJ Introduction：
AT300QJ model description
For example: AT300QJ220—325/16
AT: Abbreviation of Chinese Aote (Enterprise Standard)
300: Minimum well inner diameter
QJ:  Q, submersible (the first letter of Chinese Qianshui )
J, Seawater (the first letter of Chinese Haishui)
220:Flow capacity (m3/h)
326/16: 325, head (m)   /16  16-stage impellers series connection

Material
Delivery casing: non-corrosive medium: cast iron HT200; mildly corrosive medium: anticorrosive coating, chemical treatment; moderately corrosive medium: stainless steel 304; strongly corrosive medium: stainless steel 316, stainless steel 316L, tin bronze 3861.
Shaft: choose the material according to the medium. Non-corrosive medium:45# Cold-drawn steel with chrome plating shaft; moderately corrosive medium: 2Cr13, 3Cr13; strongly corrosive medium: duplex stainless steel.
Bushing: it is technological secret.
Packing
If the customer has no special requirement, we generally pack the products with wooden cases. The pump and motor are packed in one case if the total length of the full set is less than 3.2m. Contrarily, the pump and motor are respectively packed.
Technical parameter
Maximum outer diameter: 143mm. Outlet diameter: 65mm/68mm
Dimension of the outlet flange(4 holes): center distance, 110mm; aperture, 11m
Attention:
For the convenience and quality, all the related products are manufactured by us. The following products:
1.  All kinds of lifting pipes including ratio-frequency welded pipes (dia.25mm-500mm); connect type: flanged connection, screwed connection and clamp connection. They are made accurately by machine tools.
2.  Pipe clamp: the length is 50mm-500mm (span as required).
c. Wellhead devices including recharge wellhead (applied to earth source heat pump), regular base plate with advanced manufacturing technique.
3.  Demander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.
4.  Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set ,etc.
5. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation
Product Selection Table