This is a network fingerprint access controller, which can externally connect RS485 fingerprint reader. It can also connect network access control board to work as fingerprint reader. With time attendance function, it can work as standalone or network running. It uses multi-core ARM processor, have mass memory. Built-in fingerprint identification circuit to support high-speed identification and rejection of false fingerprints. Support 1 group of unlock relay, 1 group of door sensor, 1 group of alarm output, U disk to backup data. Living Fingerprints, High Speed Algorithms, Maximum fingerprint capacity can made into 300 million.

Parameters:
Working Temperature: 0-70℃
Humidity: 20-80%
False Rejection Ratio: < 0.01%
False Acceptance Ratio: < 0.0001%
Working Voltage: DC12V
Display screen: 2.8 inch TFT color screen
Comparisons: 1:N, 1:1
Registration Way: Fingerprint, Password, Mifare Card
Fingerprint Acquisition Area: 16*14 mm
The acquisition Angle Range: ±45°
Confirmation Response Time: <1 s
Storage Capacity: 5,000 fingerprints, 5,000 cards, 5,000 passwords, 200,000 records(30,000 fingerprint can be customized)
Communication interface: TCP/IP, RS485, USB (WIFI need to customized)
Controller Interface Protocol: Wiegand26
Dimension: 198.5*89*45mm