1x32 MEMS switch is a very fast opto-mechanical switch working over both telecom wavelength windows from 1240 nm to 1640 nm. The highly reliable switching mechanism is based on micromechanical mirrors and features below 1 ms switching time and only 1.5 dB insertion loss. The miniature package withstands r ed environments and is well suited for direct mounting on printed circuit boards.

1x32 MEMS optical switch FEATURES

· reliable

· 1.5 dB insertion loss

· 1 ms response time

· 60 dB crosstalk

· non-latching

1x32 MEMS optical switch APPLICATIONS

· Source Selection

· Protection Switching

· Monitoring

· Wavelength provisioning

1x32 MEMS optical switch DESCRIPTION

The non-latching 1x32 switch modules are fast and reliable switches designed for single mode fiber instrumentation and communication equipment. The device is based on the latest silicon MEMS technology and uses micro-mechanical mirrors to redirect the light. The absence of fatigue and wear-out allows to achieve a constant switching quality even after billions of actuation cycles. The switch features fast switching below 1 ms and high crosstalk attenuation above 60 dB. Repeatability is better than 0.01 dB. The switch is powered by a 5 V supply voltage. A 5 V TTL or CMOS drive signal is used to control the switching state.

1x32 MEMS optical switch  TECHNICAL SPECIFICATIONS