Ku band single universal PLL LNBF specification

1.Input Frequency:

1).Low Band:10.70 GHz -11.70GHz

2).High Band:11.70 GHz -12.75GH

2.Output Frequency:

1).Low Band:950-1950MHz

2).High Band:1100-2150MHz

3.L.O. Frequency:

1).Low Band:9.75GHz(1MHz@25centigrade)

2).High Band:10.6 GHz(1MHz@25centigrade)

4.L.O. Stability:

1).Low Band:±1MHz(-40centigrade to +70centigrade)

2).High Band:±1MHz(-40centigrade to +70centigrade)

5.Noise Figure: 0.1 dB

6.Conversion Gain≥60dB

7.Gain Flatness≤+/-2dB

8.Intput VSWR:2.5:1(max)

9.Output VSWR:2.0:1(max)

10.Output Connector:F-female Connector

11.Output Impedance:75Ω

12.Cross Polar Isolation:20dB(min)

13.Supply Voltage

1) Ca:11.5-14.0v(Vertical Polarization) 13VDCType

2)Cb:16.0-19.0v(Horizontal Polarization)18VDCType

14.Direct Current:150mA

15.Control Signals:

1).Low Band:Ca or Cb(see below)

2).High Band:Cc or Cb(see below)

3)Cc:continues 22KHz

16.Operating Temperature:-40centigrade to +70centigrade

17.Storage Temperature:-40centigrade to +80 centigrade

18.Relative Humidity:0%-95%

19.Phase Noise

1)-50dBc/Hz@1kHz(max)

2) -75dBc/Hz@10kHz(max)

3) -95dBc/Hz@100kHz(max)

20.Image Rejection:45 dB (min)