Material:	Aluminium Zinc Alloy	Treatment:	Ceramic Stone Coating
Waterproof:	50 Years	Size:	1280*420mm
Thickness:	0.4mm	Color:	Chestnut, Sandal Brown, Originatal Red,coffee,green
Origin:	China	Model:	Wooden Shingle

 

Stone Coated Metal Roof Tile / steel roofing shingle

Sunstone roof Stone Coated Metal Roof Tile / steel roofing tile is made from a corrosion resistant metal and coated with stone chips that are attached to the steel with an acrylic adhesive layer. Their goal has been for a more durable roof that still retains the aesthetic advantages of a more traditional roofing material such as clay tile or wood shakes.

Stone chip coated metal tiles typically are attached with the use of corrosion resistant screws after they have interlocked with all the adjoining tiles they abut and overlap. Foot traffic should be held to a minimum so as not to wear away the protective stone surfaces or dislodge the interlocking laps that allow them to withstand the effects of storms.

Another reason why these steel shingles are coated with stone is so that they are not loud during rain storms. This coating also directly protects the steels from suffering from wear and tear. If you live in an area that is no stranger to heavy thunderstorms, you should definitely look into replacing your existing roof with this special kind of shingle.

 

Stone coated metal roof tile steel roofing tile offer an endless assortment of colors, shades and patterned textures to replicate the other type roofing materials. They, like all the metal roof products, are extremely light in weight so they can be applied on any roof surface, and can match the look of more expensive and less durable shingles such as wooden shake shingles.

Stone coated metal roof tiles have been tested for high wind resistance and perform very well. Their weathering characteristics exceed the more typical roofing types but as with all roofs, a roof surface clean from debris and abrasive events leads to a long life of service.

The idea behind this type of special shingle is to have a roof that will last you a very long time. Because these shingles are stone coated and made of steel, they are very resistant to bad weather, heavy rains, wind damage, and any other type of damage that traditional roofing tiles are vulnerable to.

The reason people would rather have suns-tone roof brand stone coated steel roofing tile is because they last longer than cedar shingles and roofing slate, and they cost much less. Why spend more on a product that will not last as long when you have this product as an alternative.

 

Features and advantages of stone coated metal roof tile

1.Manufactured by corrosion-resistant aluminum zinc alloy steel, plus the special surface filled by natural color stone and acrylic resin, treated by high temperature and unique technique process

2.Lighter, stronger and more beautiful and lasts much longer than the common tiles

3.Easy to install: easy to bent, cut and install, no special technique needed

4.Beautiful appearance: natural stone with various colors and shapes, makes an excellent decorative and stereoscopic landscape

5.Long life time: The life time warranty is 30 -50years.

6.Light weight: weigh only 1/5 than the clay tile or cement tile of the similar size, load-bearing of the building then can be reduced significantly

7.Energy-saving and environment-friendly: the heat reflective rate is 1.4 to 7 times more than common roof tile, no harmful material generated during the installation and be recycled.

 

Stone coated roofing metal tile, steel roofing tile, building material for Nigeria,Kenya

 

Feature:

1. Durable: Stone coated metal roofing system has the advantages of heat-resisting, corrosion resisting and ageless.

2. Safe: The unique waterproof, windproof, the installation design, together with the advantages of natural stone and steel, Metal Roofing System can against of strong wind, heavy rain, and hail penetration.

3. Light-weight: Stone coated roof tile is only 1/6 of the weight of normal ceramic or cement tile, which makes it much cheaper to transport and easier to install.

4. The Aluminum-Zinc Alloy Coated Steel offering the superior corrosion resistance.
The use of non-toxic harmless bond, the natural stone and 10 available colors enhances the environmental friendly and stylish advantage.

 

Technical details

 

Test item	result
Resistance to weathering	1000h: coating no cracks, no powder, no foam, no obvious discoloration
Heat resistance	90±2℃: no obvious change
Cold water resistance	-40±2℃: 24h no obvious change
Water resistance	240h: No foam, no no obvious change discoloration
UV resistance	60℃: 1000h no obvious change

 

The characteristics of colorful-stone coated metal roof tile

 

1. beautiful appearance: with the natual stone texture and strong stereoscopic sensation, and a variety of shapes, varied colors of tiles, have extremely good beautification effect the buliding
2. longlife time :adopt hige strength ,high corrosion resistance aluminum zinc alloy steel plate, its corrosion resistance is 3-6 times than the corrosion resistance of galvanized steel , the surface material by weathering of natural stone particles or inorganic pigments dyeing natural gravel and water-based acrylic resin, products life up to more than 30 years.
3. lighter weight: only equivalent material ,cement soil of 1/6, can reduce the load of the building,and it can reduce the cost of project, For the roof ,easy to transport and repeated construction and installation..
4. construction simole: to bending, cuting ,easy installation,simple ,low temperature season may construction
5. energy conservation and environment protection:the heat reflective rate is 1.4-7 times than average roofing material ,easy energy saving ,using environment protection material ,and no harm to people and environment.

 

PRODUCTION

Our production facility is one of the most sophisticated in the world. The teamwork between our technical and production groups has resulted in many automated systems. These systems are not just responsible for production speed, they also ensure the consistent quality of our finished goods.

Producing a coated metal tile involves four basic steps.

1. metal forming
2. coating
3. curing
4. warehousing

METAL DEPARTMENT

Large coils of Zinc-Aluminium steel are shipped into the factory. The coils are cut and formed into roof tiles and accessories.

COATING DEPARTMENT

The newly formed pieces are sent from the metal department to the coating department. Here they are coated with either high-grade roof paint, or coated in basecoat and covered in stone chips.

CURING DEPARTMENT

The newly coated pieces are then transferred to large ovens where they are baked until the coatings are fully cured and stable.

WAREHOUSING

All the cured parts and pieces are then palletized, wrapped, labeled and prepared for shipping.

QUALITY CONTROL

We employ full time professionals whose sole responsibility is testing and auditing our production process and materials. Adherence to strict guidelines maintains our foremost level of quality.