1. Description of Hot Sale Liquid Silicone Gel for Silicone Cosmetics Sponge

The silicone gel is a kind of two components (1:1mixing ratio) addition cure silicone with good chemical stability, electrical performance, and lasting elasticity at the temperature of -65~200℃. It has the properties of water proof, ozone proof, weather proof, corrosion protection, physiological inert, non-toxic, tasteless etc. Thus, it can be used widely as electronic products potting, life like products and so on.

2. Typical Applications of Hot Sale Liquid Silicone Gel for Silicone Cosmetics Sponge

-air filter potting
-flume potting
-bonded seal of electronic components
-power module and control module, which requires waterproof and insulation.
-LED screen, Wind Power Generator, PCB substrate,PP,ABS,PVC etc.
- silicone breast pad, artificial breast, silicone bra, simulation breast, silicone nubra

3. Characteristics of Hot Sale Liquid Silicone Gel for Silicone Cosmetics Sponge
1). Good self-leveling.
2). Neutral, no corrosive. 
3). Excellent adhesion properties for most materials. 
4). Excellent electrical properties and waterproof. 

Guidelines

1). Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2).Weight Ratio: part A: part B = 1:1
3).Deaeration the mixture under -0.1 MPa for 3 minutes.(If no, skip it)
4).The temperature influences the curing time of silicone gel. When in too low temperature(below 5℃), we s est customers appropriately heat the mixture to accelerate vulcanization.