Application

Hydrostatic Head Tester, used for determining the resistance of fabrics (canvas, coated fabrics, cover cloth, rainproof clothing fabrics and geotextile materials) and films to water penetration under pressure while firmly clamped in the test rig of standard area, by means of dynamic test method and static test method.  the bank is linked to a test head to which the specimen is clamped quickly and stably by means of an automatic clamp.

after starting the hydrostatic pressure test, the test pressure is automatically controlled; a hydrostatic head tests results and the process is digitally displayed on the touch panel or a computer. the test specimen is observed visually for evidence of penetration by water. the test area is well illuminated and an unobstructed observation of the sample available from all sides greatly facilitates the visual drop detection. 100cm2 hydrostatic head is included.

Specifications

Closed-loop controlled servo motor drives pistons to achieve the unique water pressure raising rate balance system.

Variable test method can be selected, test time and variable pressure increasing rate can be set and saved.

Wide range of pressure increasing rate and freely adjustable. Pressure increasing system is adjusted by the dynamic feedback to prevent overload.

Real-time test results are shown on the large colourful touch panel and computer.

Test results can be made up to a report on software and print out directly.

5 test methods are included     
Pressure raising mode, Constant-pressure mode, Constant pressure & fixed time mode, Extending-relaxing mode, Water penetration and leakage mode

Equipped with a LED lamp to observe test process clearly

Pressure Range: 0 - 200kPa (20m water column). 500kPa or 1000kPa are offered on request.

Increasing rate of water pressure: 0.1 ~ 100kPa/min stepless adjustable

Units: PA, kPa, mmHg, cmH2O

Automatic clamp with holding force: 5kN

Specimen Holder: 100cm2 (7.8cm2 optional)

Standards: ATCC 127, ISO 811/1420A, EN 20811, BS 3321, EN 1734-1996, JIS L1092 B-b, DIN53886, ERT 120-1/160-0, GB/T 4744, AFNOR GO7-057

Power: 220V   50Hz   200W

Weight: 130 Kg

Dimensions: 560x400x600mm (LxWxH)