Machine profile:
This machine is our product of the spring loaded cone crusher partially upgraded with structure improved by adopting the multi-cylinder hydraulic technology, based on the high efficient cone crusher; It is more economic in use. This series of machine is mainly suitable for hydropower project, building, road construction, mine with hardness of crushed stone not exceeding 300Mpa. It is strong and high efficient in
crushing stones, with low energy consumption, even product particle size.

Machine features:
1.The machine case is one casting piece. With long service life and high reliability;
2.It provides half-auto hydraulic pressure for adjusting the discharging exit. It can effectively control the stone size. It is fast and convenient;
3.It is a special design for crushing cavity, which has greatly improved the production capacity;
4.It provides iron protection, is safe and reliable. Cavity clearing is automatically and hydraulically driven, and it is time and labor saving;
5.It provides a structure of labyrinth and grease seal, with a good dust prevention effect;
6.The oil circulation cooling system is designed according to customers’ actual situation and characteristics, and it operates conveniently and reliably;
7.It is light and compact with reasonable structure.
8.The crusher plate has no stuffing required, is easy to change.
9.The crusher plate is provided with the patent formula, more wear-resisting. It has long service life, and has high cost performance.
Suitable material: pebble, limestone, dolomite, granite, rhyolite, diabase, basalt,quartzite, black metal ore, nonferrous metal ore, construction waste, gangue etc.

PS one: The parameter weight in the table not contain the weight of electric engine,electric controlling equipment, lubricating equipment and hydraulic pressure equipment.
PS two: the crusher parameter capacity in the table meets the design output amount as the following conditions:
a) The material water content does not surpass 4%, not containing clay;

b) The fine particle smaller than the throat feeding material is below 10% in the total feeding material, and is circular distribution in the crushing cavity.
c) The feeding material bulk density 1.6t/m3, compressive strength 150Mpa.
Application: used for crushing construction rock, solid waste.