Product Description

Sakysteel maintains an extensive inventory of stainless steel products, including stainless steel coil, plate, diamond plate, 2B 2D mirror stainless steel sheet, stainless steel polished sheet, stainless steel flat & expanded sheet, and perforated stainless steel sheet.

Sakysteel Stainless offers over 20 different grades in stainless steel products. With our mill partnerships, we can also source many hard to find or other non-standards sizes. All stainless steel sheet can be cut to size with our full range of processing services, including shear cutting, waterjet cutting or laser cutting capabilities.

Sakysteel Stainless steel Coil Finish

No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish. 

No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls. 

Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.

No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.

No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. 

No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.

 

Process Service

Process Service

Laser Cutting

Steel, Stainless and Aluminum
Thickness: 26 ga to 0.375"
Tolerance (Stainless): 10 ga to 0.188": +/- 0.015"
Advantages: Whether it’s stainless steel, aluminum, or steel, laser cutting gives the cleanest edge and the tightest tolerances of any cutting method Sakysteel offers.

Plasma Cutting

Thickness: 0.125" to 1.75"
Tolerances: +/- 0.125 Tolerances depending on thickness;
Advantages:Need circles or other patterns cut out of steel, stainless steel, or aluminum? Ability to cut thicker material than laser cutting:1.75" stainless;

Water-Jet-Cutting

Thickness: 0.0359″ to 2″ thick stainless
Tolerances: ±.030" ,Tolerances depending on thickness;Advantages:the ability to cut material without interfering with its inherent structure, as there is no "heat-affected zone." Minimizing the effects of heat allows metals to be cut without harming or changing intrinsic properties.

 

Application

Application

 

Packing & Delivery

 

Packing & Delivery

1 Sheets covered with wooden plate for protection in transportation.
2. All sheets will be loaded in strong wooden packages.
3. Every cartons loaded with good shoring and strengthening.
4. Take container loading pictures and seal the container.
5. Transportation speed is quick. And keep customer each step informed.

Our Service

Our Service

Certifications

Certifications

 

About Sakysteel

 

About Sakysteel

 

 

Sakysteel maintains an extensive inventory of stainless steel products, including stainless steel plate, diamond plate, 2B 2D mirror stainless steel sheet, stainless steel polished sheet, stainless steel flat & expanded sheet, and perforated stainless steel sheet.Sakysteel Stainless offers over 20 different grades in stainless steel products. With our mill partnerships, we can also source many hard to find or other non-standards sizes. All stainless steel sheet can be cut to size with our full range of processing services, including shear cutting, waterjet cutting or laser cutting capabilities.

 

Ouality Control

 

Ouality Control

 

FAQ

 

Contact Us

Contact Us