Electronic Potting Silicone Rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.

Warm Tips for for PCB Electronic Potting Silicone
 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
      it does not affect the performance.
 

Package for for PCB Electronic Potting Silicone

Regular Package:20kgs/drum  200kgs/drum

Small Package:1kg/tin   5kgs/tin

Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
   pouring. It comes to next process when basically cured, and it takes about 24 hours
   for completely cured.

Further information for PCB Electronic Potting Silicone, please feel free to contact Ms Taylor :

Tel: +86-0755-89212380

Mob: +86-18948315842

Skype:evie578

Youtuebe:  http://www.youtube.com/user/siliconeRTV/videos