Specifications

Clean room fogger is used to visualize airflow and turbulence in pharmaceutical ISO 5 areas, barrier isolators and clean rooms

Specifications

Place of Origin:United States   Brand Name:   CleanRoom Fogger

Model Number: CRF           Power:  Electronic

1) Pharmaceutical USP 797 & Semiconductor Applications

2) Polypropylene Enclosure: No Fingerprints as with SS, Easy to Clean

3) Create Fog with Di Water or Distilled WFI Water

4) Video Airflow Patterns, Air Migration and Turbulence

5) Visualize Pharma Isolator & Glove Boxes, Fume Hood Performance

6) Visualize Semiconductor Clean Room Pressure / Turbulence Issues

7) 6cfm of Fog for 60 Minutes Operation, Refill and Continue Fogging

8)Fill Level Indicator and Water Drain;

9) Top Holding Handle Provides Convenient Carry of Fogger

10) NEW Fog Curtain Tube , Optional to create a Fog Wall

11) NEW Rolling Carrier for transport and Product safety

12) NEW Remote Power On/Off Switch for isolated operation. 5 meters

13) Low Water Sensors for Transducer Protection

14) Corrugated, White Fog Tube, 30” ~ 80” extended, 2.35” ID, 2.6” OD

15) On/Off Power Switch

The CleanRoom Fogger is a DI Water Fogger designed for low cost, easy to use visualization of airflow and turbulence with on/off fog control in clean spaces and around equipment. Fog visibility distance is based on airflow velocity and humidity around the fog. DI Water Foggers produce a 65 degree, visible vapor composed of microscopic DI water droplets (fog) at 8-10μm droplet size. The fog is as clean as the DI Water or WFI Water used. 16 Meg Ohm DI water is typical Di Water used, or you can use Distilled Pharma WFI water. The fogger cost is kept low for budget requirements. Ultrasonic transducers convert liquid directly to droplets. Low water sensors protect the transducers during operation. Also provided is a visible fill level indicator to prevent water over fill. As with all WET Benches, the CleanRoom Fogger enclosure is produced with a polypropylene material to provide a quick, easy wipe down of the fogger after use, while preventing fingerprints as encountered on instruments with SS enclosures. A handle is provided on top to provide easy carry of the fogger.

A standard power supply is provided at 110VAC or you may select a 220VAC power supply. A flexible, corrugated, white fog tube can be oriented in any direction for fog directional output. For operator convenience the Operating Instructions, Application Notes and Specifications are labeled on the side of the fogger enclosure. 16 Meg Ohm water is typically used for Semiconductor and Pharmaceutical use. Distilled WFI Pharma water can also be used in the CleanRoom Fogger.

More information：

contact us         2850331356@qq.com   ；   2850331356@qq.com