Welded wire mesh machine list

1. This machine is fully automatic to feed wires, weld mesh, cut edge and roll mesh.

2. The raw material is applicable for low-carbon steel wire, galvanizing wire and stainless steel wire.

3. It has advantages of reasonable design, low noise, stable working, easier operation etc.

4. The mesh size is precise and can be set according to customers’ requirements.

5. It adopts sealed &water cooling welding transformers, the scoria can not easily goes in.

Type1:for roller mesh

Wire diameter: 0.6--1.5mm

Mesh size: 1/2”,1”,1 1/2”,2”

Width:2000mm

Motor:2.2KW

Transformer:60KVA*5

Speed: 90--100 rows/min

Spare parts: wire shelf, wire axis machine, mesh repairing machine, welded pot two pcs, pressure spring two pcs, strong magent.

Type2:for roller mesh

Wire diameter:1.0--2.2mm

Mesh size:1”,2”,3”

Width: 2000mm

Motor: 3.0KW

Transformer:60KVA*6

Speed: 70-80rows/min

Spare parts: wire shelf, wire axis machine, mesh repairing machine, welded pot two pcs, pressure spring two pcs, strong magent

Type3:for panel mesh

Wire diameter: 1.0--2.5mm

Mesh size:50mm

Width:1200mm( for this type the maximum width is 1200mm)

Motor: 3.0KW

Transformer: 70KVA*5

Speed: 60-80 rows/min

Spare parts: whole set wire payoff, electric cutter. Mesh repairing machine.welded pot two pcs, pressure spring two pcs, strong magent

Type4:for panel or coil

Wire diameter: 1.5--3.0mm

Mesh size: 50mm-200mm

Width: 2000mm

Motor: 4.5KW

Transformer: 120KVA*4

Speed: 60-70rows/min

Spare parts: wire straighten and cutting machine, wire payoff,electric cutter, mesh roller,welded pot two pcs, pressure spring two pcs, strong magent