How to use the PDR dent mini lifter puller?

1. Clean the dent with a clean wet cloth
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6~7.Align the errepairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
8. Clean the repaired place with a clean wet cloth.