Antisticking Agent for Rubber BM1068

1. Brief Product Introduction:

This product is used for automotive rubber, pipe, sheet and other rubber products, anti-sticking treatment. Used in the production of processing and processing technology to prevent the adhesion between rubber and mold, rubber and rubber bonding between. The product is an ordinary releasing agent upgrade products, its high content, low foam, foaming light, a large proportion watered, good anti-sticking effect.

2. Performance Index:

1. Appearance: White viscous emulsion

2.PH value: 5.0--8.0

3. Water-soluble: cold water that is soluble

4. Ion: non-ionic

 3. How to use it:

1. In the mixing process, raw film into a film, spray, smear, leaching anti-sticking agent BM-1068 aqueous solution, can play the role of anti-adhesion. Moreover, the storage temperature is lower than 30 ℃, can be stored for more than a few months, easy to use the glue factory.
2. Extruder extruded hose after cold water cooling, spraying, smearing, leaching anti-sticking agent BM-1068 aqueous solution, the hose can be played before the anti-adhesion role in vulcanization. Moreover, after the vulcanization, the hose without traces, but also reduce the possible blow cream.
3. General recommendations for 1: 4-10 times the use of water. According to the different rubber formulations, may be appropriate to adjust the proportion of water, the maximum watered up to 1:20.
4. The use of this product should be regularly cleaned the tank to avoid the long-term use of the backlog of material impact of water circulation system.
5. This product should be mixed in the water when the uniform, long-term storage due to the case of cold caused by thermal environment caused by stratification, will not affect the use of the goods.

4. Packing and storage:

1. Packing in 200kg/drum, 25kg/drum.

2. Storage temperature:≥5℃. When storing it in low temperature, if solidification appears, please heat it. After melting, stir it evenly, that will not affect its performance.