Production Introduction

hydraulic rock saw excavator cutting blade

Our Rock Saws run an ultra-high torque, low RPM radial piston motor with direct drive provided through the main motor shaft. This system ensures maximum torque is available at very low RPM, and there are minimal frictional losses due to the lack of any gear, chain or belt drive systems. This design ensures the maximum output of the hydraulic motor is available where it counts, at the cutting tip of the blade. Together with our patented Carbide Tip Holder system, this ensures you can achieve maximum output and superior performance in excavation and extraction of hard stone blocks.

Characteristics：

hydraulic rock saw excavator cutting blade

1、The compact size of the machine case of the diamond tipped rock saws gives the maximum cutting depth from the blade. Often, this means that a smaller blade can be used. This reduces the cost of consumable parts (small blades are cheaper than large blades) and makes handling and use of the rock saw easier.

2、The fast blade rotation of the diamond rock saws maximises cutting efficiency, lowering cutting costs and increasing overall productivity.

3、The diamond saws come with high quality blades and cutting stones, to provide long life for your blade.

4、The rotating stand allows easy regripping of the rock saw for alternate side cutting. With the rotating stand, there is no need to travel around the saw with the excavator.

5、simple installation, maintenance and economic, to the construction

of your problems with the construction of new methods and  

of great pleasure and strong cutting force.

6、high power, high efficiency, convenient installation, water cooling

can be directly mounted on the excavator.

Application：

hydraulic rock saw excavator cutting blade

1、Cutting along a boundary wall

2、Excavations for footings, basements, lift shafts

3、Hard materials quarry: such as granite, limestone

4、tight access excavation

Accessories：

hydraulic rock saw excavator cutting blade

1、additional head brackets to suit any excavator

2、Cutting Optimiser for dramatic improvement of productivity

3、rails for cutting at all angles

4、adjustable offset extensions - fixed length or hydraulic

Data

hydraulic rock saw excavator cutting blade

Excavator rock saw
Model Excavator Range	model	D2S/80	D2S/100	D2S/125
	tonnes	1--4	2--4	3--4
Blade dia. Range.(note 1)	mm	1000-1200	1000-1200	1200-1400
Output Power-Continuous	kW	18.2	19.5	17.5
Spindle Torque-Continuous	Nm	230	285	320
Pressure-Continuous	MPa	17.5	17.5	17.5
Spindle Speed-Continuous	rpm	810	750	600
Flow Continuous	l/min	60	60	75
Blade Rotation Reversible		yes	yes	yes
Case Drain required		no	no	no
Brake		yes	yes	yes
Cutting Depth Loss	mm	75	75	75
Mass	kg	45	45	45
Trench Width - Minimum	mm	290	290	290

 

Packaging & Delivery

hydraulic rock saw excavator cutting blade

Packaging Details:BOX

Delivery Detail:Shipped in 5 days after payment