Trapezoidal sheet roofing rolling forming machine 
MATERIAL:
(1) Coil Width: 1220mm
(2) Suitable Coil Thickness: 0.3~0.6mm 
(3) Suitable Raw Materials: color steel plate (yield strength: 550Mpa)
(4) Suitable steel coil max weight: 5 Tons

MAIN TECHNIQUE DATA OF Trapezoidal sheet roofing rolling forming machine :
(1)Line forming speed: 20m/min
(2)Roll forming line power source: 380V/50Hz/3 Phase
(3)Total power:12KW(According to actual design)

Trapezoidal sheet roofing rolling forming machine  WORKING PROCESS:
Decoiler -feeding guide-main roll forming- cutter-final products output 

Trapezoidal sheet roofing rolling forming machine MACHINE COMPONENTS:
(1) Hydralic decoiler--1 set (5 tons)                              
(2) Main roll former-- 1 set (includes guide device)
(3) Hydraulic cutter-1 set                                                       
(4) Hydraulic station-- 1set                            
(5) PLC control system 1 set                            
(6) Final products rack-1set (total length is 4 meters)                       

LINE TECHNICAL SPECIFICATION OF EACH PART

1. Hydraulic decoiler 
   Motor power opens steel coil, and hydraulic power expands steel coil inner   diameter. 
   1)  Machine frame :welding structure with shot blasting treatment
   2)  Description: Put the coil to the mandrel, the hydraulic cylinder will tighten  
       the coil. Start the machine, the hydraulic motor will drive the mandrel at 
       first, then the steel sheet will be released.Take the sheet to the forming rollers 
       and it will move automatically while the rollers run.
   3)  The light control is used to adjust the speed of releasing .
   4)  Decoiler control cabinet and hydraulic station are all within the machine 
       base.
   5)  The decoiler is single head model, max loading capacity: 5000kg
    
  Decoiler outer form reference picture:

 
Guiding device
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The sheet is guided in the correct position and runs to the roll forming equipment.
               Guiding device outer form reference picture


3. Main roll former:
  Main roll former outer style is single forming stand.The transmission system includes main motor, chain, gear and chain wheel.All working actions were control by electric cabinet.            
  1)  Machine frame: welding structure with blasting treatment.
  2)  The roller is made by high quality no.45 steel with hard chrome-painted.The   
      roller is designed by professional software, and all rollers dimension are  
      precise.
  3)  Roller inner supporting structure type: single forming stand.
  4)  Planetary gear speed reducer motor driven, back/forward roller driven by 
      chain, part of upper/lower rollers driven by gear. Main motor power about 
      6KW(According to actual design)
  5)  Adjust the screw bar manually to adjust the distance between upper/lower 
      rollers for different thickness of sheet.
Main roll former outer form reference picture:


4. Hydraulic cutter:
  The hydraulic cutter model is stop to cut, Post cut. There is no waste piece final product after cut actions. When cutter is working, line also needs to be stopped. Complete line starts again after cut action is finished.
  1)  The cutting blade material is Cr12 with quenched treatment.
  2)  The power of cutting is provided by motor
  3)  The cutter can cut the final products on confirmed length, and the length is  
      automatically fixed by coder. 
                    Hydraulic cutter reference picture

5. Final products rack (4 meters): 
  Two parts, total length is 4 meters. It is used to collect the final product and final products automatically. When final product plate is out of cutter device, operator can move away final plates soon.
  This rack can be disassembled easily, in order to satisfy different working condition requirements.

6. Hydraulic station:
  Complete line includes few hydraulic stations, they are working separately. .It supplies the power for the hydraulic decoiler, decoiler car and cutter.
Will be displayed inside of the machine
   All hydraulic accessories are all use Chinese famous brand products. 
       
7. PLC Control System: 
   This system uses Mitsubishi PLC to control all working actions. Production quantity and each piece length will be automatically measured; human and machine interface, touch screen is inputting and canceling the working data. It is convenient to control the roll forming machine.
   The control panel has English operation interface, it is convenient to operator to input and cancel working date.
   Operation model: touch screen+button












Packing and shipping about the Standing seam metal roof panel machine




http://www.m-rollformingmachine.com