YST306 series are RFID reader/writer module which pick or send command by USB and RS232 ports. YST306 series meet kinds of international contactless IC card standards. Also YST306 series can support kinds of cards from suppliers. YST306 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. YST306 series RF antenna is separated from the module. The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout. There is a LED lamp holder, can output LED lamp state.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP RC500

Working frequency: 13.56MHz

RF standard: ISO14443A, ISO7816

SAM card slot:4

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Operating distance: 80 mm (depending on card and antenna design)

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

EEPROM: 4K

Interface: USB or RS232

Max command length: 1024 Bytes

Interface level: 3.3V

Power consumption: 50mA

Dimension: 105mm*67mm *8.5mm

Package: DIP32

Weight about: 100g

Operating temperature: -25～+85℃(-77～+185℉)

Storage temperature: -40～+125℃(-104～+257℉)

ISP: Yes