Basic Introduction 

All series with a replaceable membrane. This line is ideal for every modern installation and can be applied to any type of pump. The real volume of the pressure vessel is much greater than normal that of normal tanks of the same dimension with smaller dimensions. A compressor is not necessary since an air cushion, separated from the water by the membrane, maintains a constant pressure in the tank. These tanks can also be provided with stainless steelflanges.

These tanks for water booster system ,pumps, potable water storage.

Advantages
The usable capacity of these membrane pressure tanks is superior to that of a normal tank. Less footprint at equal water yield, minimum pump starts and saving in energy consumption. The wide range (vertical and horizontal) makes Aqua-Leader pressure tanks suitable for many applications. The tank is supplied already tested and certified by our factory according to the European Directive CE Certificate. Maximum durability of the membrane is assured as the membrane cannot bend or rub against the plate, as it is fixed at both ends of the tank.

Technical features
The use of stainless steel with a membrane suitable for cold water, hot water and alimentary purposes are the main features of this range of vessels. Our range of stainless steel expansion vessels is equipped with a nontoxic membrane suitable for contact with drinking water according to the British WRAS/Work and French ACS regulations. The high quality of materials, efficient manufacturing procedures and continuous quality control, these stainless steel expansion vessels allow long lasting operation with minimal special maintenance.

Working
when the pump starts, water enters the membrane tank as system pressure passes the pressure pre-charge using the available capacity of the tank (only useable water is stored). When the pressure in the chamber reaches the maximum system pressure, the pump stops working and the tank is filled to its maximum capacity. Pressure in the air side of the tank will push water into the system when there is a further requirement. The ultra inox-pro tank does not get logged with water and delivers all water possible, minimum pump starts are assured, saving energy and increasing the pump life.

Main Feature 

1.Lower cost with replacebale membrane

2.Working pressure range from 4 bar to 25 bar 

3.Two part polyurethane, epoxy primed paint finish

4.Comprehensive testing

5.NSF Standard 61, CE/PED, WRAS, ACS, ISO:9001 approved

Technical Parameter