Rogers 3206 0.634mm DK10.2 Material High Frequency PCB Board Fabrication

Detailed Product Description

Model:	XCEH	Origin:	Shenzhen
Size:	8*9cm	Layer	2
Brand:	XCE	Color:	Green

 

Specification

• 2 layer
• Green solder mask, 
• Model:XCER
• Copper THK: 1OZ
• Location: Shenzhen

 

The increasing complexity of electronic components and switches continually requires faster signal flow rates, and thus higher transmission frequencies. Because of short pulse rise times in electronic components, it has also become necessary for high frequency (HF) technology to view conductor widths as an electronic component.

Depending on various parameters, HF signals are reflected on circuit board, meaning that theimpedance (dynamic resistance) varies with respect to the sending component. To prevent such capacitive effects, all parameters must be exactly specified, and implemented with the highest level of process control.

Critical for the impedances in high frequency circuit boards are principally the conductor trace geometry, the layer buildup, and the dielectric constant (er) of the materials used.

 

Get a Production PCBs Quote

   Submit your PCB design

 

PCB production capability
Files	Gerber, Protel, Powerpcb, Autocad, Orcad, Eagle,etc.
Material	FR-4, Hi-Tg FR-4, Lead free Materials (RoHS Compliant) , CEM-3, CEM- 1, 94V0,Aluminium, High frequency Material (Rogers,  Teflon, Taconic)
Layer No.	1 - 28 Layers
Board thickness	0.0075"(0.2mm)-0.125"(3.2mm)
Board Thickness Tolerance	±10%
Copper thickness	0.5OZ - 4OZ
Impedance Control	±10%
Warpage	0.075%-1.5%
Peelable	0.012"(0.3mm)-0.02’(0.5mm)
Min Trace Width (a)	0.005"(0.125mm)
Min Space Width (b)	0.005"(0.125mm)
Min Annular Ring	0.005"(0.125mm)
SMD Pitch (a)	0.012"(0.3mm)
pcb with green solder mask and LF-FREE surface finishing BGA Pitch (b)	0.027"(0.675mm)
Regesiter torlerance	0.05mm
Min Solder Mask Dam (a)	0.005"(0.125mm)
Soldermask Clearance (b)	0.005"(0.125mm)
Min SMT Pad spacing (c)	0.004"(0.1mm)
Solder Mask Thickness	0.0007"(0.018mm)
Hole size	0.01"(0.25mm)-- 0.257"(6.5mm)
Hole Size Tol (+/-)	±0.003"(±0.0762mm)
Aspect Ratio	6:01
Hole Registration	0.004"(0.1mm)
HASL	2.5um
Lead free HASL	2.5um
Immersion Gold	Nickel  3-7um  Au:1-3u''
OSP	0.2-0.5um
Panel Outline Tol (+/-)	±0.004''(±0.1mm)
Beveling	30°45°
V-cut	15° 30° 45° 60°
Surface finish	HAL, HASL Lead Free, Immersion gold, Gold plating, Gold finger,  immersion silver, immersion Tin, OSP, Carbon ink,
Certificate	ROHS  ISO9001:2008  TS16949  SGS  UL  CE
Special requirements	Buried and blind vias, Impedance control, via plug, BGA soldering  and gold finger

 

Materials used for HF circuit boards

For many applications, it is sufficient to use FR4 material with an appropriate layer buildup. In addition, we process high-frequency materials with improved dielectric properties. These have a very low loss factor, a low dielectric constant, and are primarily temperature and frequency independent.

Additional favourable properties are high glass transition temperature, an excellent thermal durability, and very low hydrophilic rate.

We use (among others) Rogers or PTFE materials (for example, Teflon from DuPont) for impedance controlled high frequency circuit boards. Sandwich buildups for material combinations are also possible.

 

Which widely be used for :

Automotive Antennas / RFID

Back-up Aids
Collision Avoidance
Low-Noise Block Downconverter (LNB)
Mobile Infrastructure Antennas
Point to Point Digital Radios
Power Amplifiers
High Reliability

Airborne Antenna Systems
Broadcast Satellites
Ground Based Radar Systems
Millimeter Wave Applications
Missile Guidance Systems
High Speed Digital

 

High frequency:

Model	Parameter	thickness(mm)	Permittivity(ER)
F4B	F4B	0.38	2.2
	F4B	0.55	2.23
	F4B	0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0	2.65
	F4Bk	0.8,1.5	2.65
	F4B	0.8	3.5
	FE=F4BM	1	2.2
Rogers	RO5880	0.254    0.508  0.762	2.20 ± 0.02
	RO4350	0.254 0.508,0.8,1.524	3.5
	RO4003	0.508	3.38
TACONIC	TLF-35	0.8	3.5
	TLA-6	0.254,0.8,1,1.5,	2.65
	TLX-8	0.254,0.8,1,1.6	2.55
	RF-60A	0.64	6.15
	TLY-5	0.254,0.508,0.8	2.2
	TLC-32	0.8,1.5,3	3.2
	TLA-35	0.8	3.2
ARLON	AD255C06099C	1.5	2.55
	MCG0300CG	0.8	3.7
	AD0300C	0.8	3
	AD255C03099C	0.8	2.55
	AD255C04099C	1	2.55
	DLC220	1	2.2

 

 

Advantage

 

1. PCB factory directly

2. PCB Have the comprehensive quality control system

3. PCB good price

4. PCB quick turn delivery time from 48hours

5. PCB certification(ISO/UL E354810/RoHS)

6. 12 years experience in exporting service

7. PCB is no MOQ/MOV.

8. PCB is high quality.Strict through theAOI(Automated Optical Inspection),QA/QC,fly porbe ,Etesting

Karen-Sales Department
ShenZhen Xinchenger Electronics Co.,Ltd
sales3@xcepcb.com
Skype:karen-xcepcb
Website:www.fr4-pcb.com/www.xce-pcb.com