The second step, the finish of the spray.

By the professional paint personnel in accordance with the requirements of customers to adjust the color paste, and then transferred to the production workshop using the international advanced automated spraying equipment for spraying, to ensure that no color finish. Spray paint is divided into primer, coating, finish and shade, which cover the use of fluorocarbon resin, there is a strong color retention and weatherability, surface hardness can reach 2H. After each step of the spray, will be in natural light conditions, completely dry, then the next step spray.

Finally, the insulation layer and the composite panel, the factory uses high-strength aviation composite rubber --- polyurethane adhesive, the adhesive strength of up to 14.74MPa, in the insulation of the core material and the back of the panel wipe the plastic, double-sided adhesive , And then put into the 40T press, the press fixed for 8 hours to ensure that the insulation layer and the panel firmly bonded.

Horizon Ltd has been established for 8 years, and obtain the thermal insulation decoration system is under examination and approval have been dozens of patents, the system development background is to replace the traditional system of thin plastering, so where is the advantage?

Heat preservation and energy saving

The heat insulation and decoration integrated plate system is industrialized and standardized production, to ensure the effects of the heat preservation layer, can't because of the personnel construction damage; inorganic resin plate heat conduction resistance with high thermal conductivity can reach 0.030 W/ (M - K), has good insulation effect.

economical efficiency

Thin plastering system cycle is short, a few years will need renovation, re construction. The life of the insulation decoration integrated system can reach more than 25 years.