INTRODUCTION

Sky Eye-II Vue Pro gimbal is specially designed for FLIR Vue,Vue Pro,Vue Pro R thermal camera,which can be used on DJI Phantom 3,3DR SOLO and other multi-rotor platforms.It is really a very convenient tool when you need an aerial IR inspection,because it can be installed on your existing flight platform instantly,under a low cost compared to DJI ZENMUSE XT or other thermal camera gimbal. 

FEATURES

1) 313 grams,lightweight
2) 3-Axis high Stabilized Gimbal System
3) Real plug and play gimbal
4) 6 damping balls isolation

GIMBAL CONTROL

User is able to control Sky Eye-II gimbal through remote control after RC receiver is installed.3 working modes are available.

Mode 1:Yaw axis follow mode

Pitch and roll axis are locked,yaw axis follows aircraft flight direction automatically.Pitch axis can be controlled via remote control.

Mode 2:Yaw and pitch axis follow mode

Roll axis is locked.Yaw axis follows aircraft flight direction while pitch axis follows aircraft pitch direction.

Mode 3:Lock mode

Yaw,pitch and roll axis are locked.Yaw and pitch axis can be controlled via remote control.

FLIR CAMERA CONTROL

User is able to control camera PWM1 and PWM2 signal if RC receiver is installed.

PWM setting:VUE PRO camera is able to do record,capture and palette switch operation via PWM channel.PWM1 and PWM2 are fed from gimbal 10pin connector,and can be defined through phone APP if phone is connected with VUE PRO camera via bluetooth.

If you want more information,please contact us on Yangdaonline.com.