2.4G RF RGBW RGB Gledopto LED mushroom wifi bulb Android IOS

1)Soft starting mode design, the lighting will get brighter and brighter when power on, 100% full brightness within 2 seconds.

2)RGB+W/WW or WW/CW lighting color, with 640,000 different colors and 9 dynamic color changing modes;

3)Remote controlled by 2.4GHZ wireless LED controller, max controlling distance can reach 30 meter, strong anti-interference capacity or smart controlled by iOS/Android Apps from your mobile phone, manage the lighting status of flood light anytime and anywhere.

4)Memory function, the lighting resumes the previous lighting status after power on again.

5)High density die-cast aluminum housing, anti-corrosion & anti-oxidation, fast heat dissipation feature.

gledopto led mushroom bulb globe lighting introduction

Welcome to smart lighting led system.This sample bulb can work with rgbw remote control series and wifi controller or by IOS and Android system. Quick and easy installation of the smart bulb is the same as any other common led bulb.

The bulb must be screwed into the light socket and switch on at the wall for 2.4G HZ wireless operation.Allowing the Wifi App to turn on and off ,dim and bright the lights for color change.

Secure communication is done by syncing the remote and APP once.

Safety Guide 

To reduce the risk of electric shock,please insure the light socket is turn off at the wall light switch before replacing light bulbs.

Even though the led light bulb is cold to touch shortly after normal operation,please be careful when handling the mental cooling fins as they may contain sharp edges.Always hold the bulb by acrylic lens. If the light fitting is damage,please seek professional assistance.

Bulb and wireless remote controller and APP installation

1. Battery installation

Please take the remote controller and carefully press the battery cover and push it away in a downward motion. Install two AAA batteries into the remote controller. Exactly match the negative pole of the each battery into the largest spring. Do not touch the color ring when you install the batteries. 

2.App installation

Download and finish the installation of the IOS and Android APP as per wifi controller.

3.led bulb installation 

Talk the led bulb out of packing, hold it by the acrylic lens.
Switch off the power at the wall or lamp switch before installation.
Replace the original light bulb with the new wireless led bulb.
Switch on the power, the led bulb will light under normal circumstances.
Sync the remote or you APP to the bulb as per linking new lights to the remote controls and set to full brightness, change color or white.
If the bulb does not sync, then firstly clear the first channel as per unlinking the lights.

It is a high-performance RGBw led touch remote bulb, adopting the most advanced PWM control technology, ,owning 640 thousand colors and 9  automatical changing modes to choose.
Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in KTV, bedroom, bar, etc.

With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.

The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .
The forging and stamping aluminum lamp body,to the maximum extent,successfully solves the heat sink trouble by air backflow with increasing more fins. Cover of led bulb is made of PC and nanometer coolant, light transmittance over85%, light transmitting evenly.