The Introduction of Impact Crusher

 

Type of stone to be crushed: stone that within 500mm in diameter and compression srtength less than 320MPa .

Shape of the finished stones:multi diamond in shape,only with very little needle shape.

Field of application: highway,hydraulic electric power station,airport and resevoir.

 

 

The Structure of Impact Crusher

 

When the materials enter the blow bar ares,they are crushed due to the high speed impact of the blow bar and are throwm to the impact plates on the rotor for secondary crush.Then the materials will be shot back to the blow bar again for the third crush.

The size and shape of the finished powder can be changed by adjusting the gap between the impact plate and rotor support.

 

 

The Spare Parts of Impact Crusher

 

Rack Bolts quantity & position:YOURAN Impact Crusher with less bolts,The more bolts, the more possibility for

bolts loosing during vibrating.

Liner Plates:Liner plates are with high manganese steel, instead of Steel. 

Rotor Protective Layer:Rotor support is the core part for impact crushers.There is a special protective layer for rotor.

Blow Bar:High Chromium Alloy 

Impact Hammer:High Manganese Steel 

Heat treatment for shalf and rack to keep good quality.

The Process of Heat-treatment: Forging---quenching to 850℃---cooling down immediately---tempering to 550℃---exposed outside for a while---re-heat treatment.

 

Parameter

 

TYPE	Rotor Diameter&Length(mm)	Feed opening size(mm)	Max.feed size(mm)	Capacity(tph)	Power(kw)	Weight(t)
PF-1007	Φ1000*700	400*730	300	35-50	37-55	9.5
PF-1010	Φ1000*1050	400*1080	350	50-80	55-75	12.2
PF-1210	Φ1250*1050	400*1080	350	70-120	110-132	14
PF-1214	Φ1250*1400	400*1430	350	130-180	132-160	18.6
PF-1315	Φ1320*1500	860*1520	500	160-250	180-260	20

The data is just for reference.If you have any question about it,please leave message or send email to us directly.
If you are in urgent need of this machine,please call me 0086 13660726881.