9L 110V CW 3000 Industrial Water Chiller for 60/80W CO2 Glass Tube

• Features of CW 3000 Industrial Water Chiller

​1. Small laser cooling water cooler; With completed water flow and over high temperature alarm functions; Enclosed water tanks.
2. Professional forced air - cooled radiator; Equipped with alarm output port; Multiple power specifications; CE approval.
3. CW 3000 industrial water chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; Water can be used for a long time.
4. High heat dissipating capacity and not easy to be blocked; Alarm output port can quickly protect sensitive components.

• CW 3000 Industrial Chillers Benefits

1. ​Specific disconnection alarm securing protection 
2. High cost performance, low failure rate 
3. Cool Capacity is 50W / ℃ 
4. Forces circulation, 9L cooling tank capacity 
5. It can extend the using life of laser tube and ensure the engraving effect better 

• Portable Water Cooled Chiller Installation

The installation of portable water cooled chiller is very simple, the new cw 3000 machine for the first time using, you can install it as following steps 
A. Open the package and check the mini water chiller and all accessories 
B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water) 
C. Connect the inlet and outlet hose between water cooler and laser engraving machine 
D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow) 
E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm) 

• Small Air Cooled Water Chiller Maintenance 

Cooling machine air cooled water chiller used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation 
You can use non – corrosive antifreeze if you are in the northern cold regions 

• 9L 110V CW-3000 Chiller Parameter

Power Supply: 110V 
Current: 0.9A (AC100 - 120V) 
Tank Capacity: 9L 
Cooling: Radiator that forces the wind cooling 
Amount of Cooling: 50W / ℃ 
Way of Circulation: Water pump forces circulation 
Maximum Flow: 9L / min 
Maximum Pumping Lift: 10m 
Inlet and Outlet: External Dia.: 10mm brass connector 
Protection: Flow alarm

For more information, please go to www.bdchiller.net

Contact with me by aileen@bdwaterchiller.com.