Stock Mining crushing machine with screening

Introduction Overview of Stock Mining crushing machine with screening：

Stock Mining crushing machine with screening is the crusher equipment appeared earlier, because of its simple structure, strong, reliable, easy maintenance and repair and production and construction costs are relatively small, so until now is still widely in the metallurgical, chemical, building materials, electric power and other industrial sectors.

 

Application of Stock Mining crushing machine with screening：

1. Stock Mining crushing machine with screening mainly used for a variety of ore and large pieces of material of medium size crushing.

2. Stock Mining crushing machine with screening widely used in mining, metallurgy, building materials, roads, railways, water conservancy,chemical and other industries.

 

Advantages of Stock Mining crushing machine with screening：

1.Its processing capacity than the similar modelsof more than 15%, saving energy consumption of more than 10%.

 

2.Unique type of crushing chamber,higher utilization rate of jaw plate material, jaw plate can be interchanged U-turn four times, improving the utilization rate of material and prolonging the service life.

 

3.Crushing cavity jaw plate tooth peak relative, more conducive to crushing hard material.

 

4.Transmission angle adjustable structure design,has higher yield in the discharge mouth the same situation.

 

5.Universal fixed jaw plate and movable jaw plate,can effectively reduce the number of users spare parts, and installation more convenient.

 

6.Discharge port adopts double jack hydraulic adjustment mode, adjust more quickly and more effort.

 

7.Movable jaw part and the frame are detachable structure, which is convenient for transportation.

 

Working principleof Stock Mining crushing machine with screening:

The main machine, moving jaw, eccentric shaft, jaw plate, brackets and other components, the motor through the V-belt rotation eccentric shaft, the moving jaw by the adjusted track movement, which will crush the cavity of the material broken.

 

The frame is a single integral cast steel structure. The front wall of the frame is equipped with a fixed jaw fastened with a wedge bolt. A side guard is installed on the side wall of the frame around the crushing chamber to prevent the wear of the frame side wall. The movable jaw is a molded steel piece with a movable jaw plate on its front and its upper part is suspended from the frame by eccentric shaft and roller bearing. The lower part is supported on the bracket and is in rolling contact with the elbow plate. Terminal with flywheel and pulley.

The other end of the brackets is supported on the adjustment seat and is brought into contact with the bearing. The brackets are supported by the movable jaw, and the material which can not be crushed into the crushing chamber can not be broken. Insurance role, that is, their own rapid break, while the protection of other parts from damage.

 

The adjustment seat is installed in the chute on both sides of the frame and is in close contact with the wedge. When the discharge port needs to be adjusted, the nut is right-handed and the wedge is raised immediately by the wrench. Move, the discharge port from big to small, and vice versa from small to big. Structural features: The machine is mainly composed of frame, moving jaw, eccentric shaft, jaw plate, brackets and other components, the motor through the V-belt rotation eccentric shaft, the moving jaw by the adjusted track to move, so the crushing chamber The material is broken.

 

Technical parameter table of Stock Mining crushing machine with screening：

Model	Feed size (mm)	Feed granularity (mm)	Productivity (t/h)	Adjustment range (mm)	Motor power (kw)	Dimensions (mm)	Weight (t)
WPE-150×250	150×250	125	1-5	10-40	5.5	875×758×850	0.81
WPE-150×750	150×750	125	5-16	10-40	15	1200×1530×1060	3.8
WPE-250×400	250×400	210	5-20	20-60	15	1450×1315×1296	2.8
WPE-400×600	400×600	340	16-65	40-100	30	1565×1732×1586	6.5
WPE-500×750	500×750	425	45-100	50-100	55	1890×1918×1870	10.1
WPE-600×900	600×900	500	90-180	65-160	55-75	2305×1840×2298	15.5
WPE-750×1060	750×1060	630	110-260	80-140	110	2450×2472×2840	28
WPE-900×1200	900×1200	750	160-410	95-165	110	3335×3182×3025	50
WPE-1000×1200	1000×1200	850	250-480	195-265	110	3435×3182×3025	57
WPE-1200×1500	1200×1500	1020	350-800	150-300	160	4200×3732×3843	100.9
WPEX-250×750	250×750	210	15-30	25-60	22	1667×1545×1020	4.9
WPEX-250×1000	250×1000	210	16-52	25-60	30-37	1530×1992×1380	6.5
WPEX-250×1200	250×1200	210	20-60	25-60	37	1900×2192×1430	7.7
WPEX-300×1300	300×1300	250	20-90	25-105	75	2720×1950×1600	11